Important Safety Information, Energy | Danby DAC5110M, DAC5210M

IMPORTANT SAFETY INFORMATION

READ ALL SAFETY INFORMATION BEFORE USING

ELECTRICAL

SPECIFICATIONS

1)All wiring must comply with local and national electrical codes and must be installed by a qualified electrician. If you have any questions regarding the following instructions, contact a qualified electrician.

2)Check available power supply and resolve any wiring problems BEFORE installing and operating this unit.

3)This 115V air conditioner uses 10.0 or less nameplate amps and may be used in any properly wired, general purpose household receptacle. See Table 1 for specifications for individual branch circuit.

4)For your safety and protection, this unit is

TABLE 1

Suggested Individual Branch Circuit

Nameplate Amps	*AWG Wire Size
5.0 to 10	18

AWG- American Wire Gauge

*Based on copper wire at 60°C temperature rating.

grounded through the power cord plug when plugged into a matching wall outlet. If you are not sure whether your wall outlet is properly grounded, please consult a qualified electrician.

5)The wall outlet must match the 3-prong plug on the service cord supplied with the unit. DO NOT use plug adapters. See Table 2 for receptacle and fuse information. If it is necessary to use an extension cord to connect your air conditioner, use an approved “air conditioner” extension cord only (available at most local hardware stores).

6)The rating plate on the unit contains electrical and other technical data. The rating plate is located on the right side of the unit, above the power cord.

	TABLE 2
	Receptacle and Fuse Types

Rated Volts	120

Amps	10

Wall Outlet
Wall Outlet

Fuse Size	15
Time Delay Fuse	Plug Type
(or Circuit Breaker)

ENERGY-	Your Danby appliance is designed to be highly efficient in energy savings. Follow these
SAVING TIPS	recommendations for greater efficiency.

1)Select a thermostat setting that suits your comfort needs and leave at that chosen setting.

2)The filter is very efficient in removing airborne particles. Keep the air filter clean. Normally, filters should be cleaned every 2 weeks. More frequent cleaning may be necessary depending on indoor air quality.

3)Use drapes, curtains or shades to keep direct sunlight from penetrating and heating room, but do not allow drapes or curtains to obstruct the air flow

around the unit.

4)Start your air conditioner before the outdoor air becomes hot and uncomfortable, to avoid an initial period of discomfort while the unit is cooling off the room.

5)When outdoor temperatures are cool enough, use HIGH or LOW FAN only. This circulates indoor air, providing some cooling comfort, and utilizes less electricity than when operating on a cooling setting.

DAC5110M, DAC5210M specifications

The Danby DAC5110M and DAC5210M are two versatile air conditioning units designed to provide effective cooling solutions for residential and small commercial spaces. Both models come equipped with a range of features and technologies that enhance their functionality, efficiency, and user-friendliness.

The DAC5110M is a compact 5000 BTU window-mounted air conditioner that is ideal for single rooms or small spaces up to 150 square feet. Its lightweight design makes installation a breeze, and it fits easily into most standard windows. This model is equipped with a mechanical thermostat that allows users to select their desired temperature easily. The unit also features a 2-speed fan and a 2-way air direction control, providing flexibility in airflow distribution.

On the other hand, the DAC5210M is a more powerful 5200 BTU window air conditioner that can cool areas up to 250 square feet. Like the DAC5110M, it also offers a mechanical thermostat and adjustable fan speeds, but it includes additional features such as a 24-hour programmable timer, which allows users to set the unit to turn on or off at specific times, promoting energy efficiency.

Both models are equipped with multiple cooling and fan speeds, allowing users to customize their comfort level according to their specific preferences. The energy-efficient design of these air conditioners complies with Energy Star requirements, ensuring that they consume less electricity compared to traditional units. This not only helps in reducing energy bills but also minimizes the environmental impact.

Another significant feature of the Danby DAC5110M and DAC5210M is the easy-to-clean, washable air filter, which helps maintain good air quality by trapping dust and allergens. Regular maintenance of the filter extends the lifespan of the unit and ensures optimal performance.

Moreover, both units are designed with user convenience in mind. Each model includes a remote control option, allowing users to adjust settings from across the room without needing to get up. The quiet operation of these air conditioners is another advantage, making them suitable for bedrooms and workspaces where noise can be disruptive.

In conclusion, the Danby DAC5110M and DAC5210M are commendable additions to any home or small office space. With their efficient cooling capacities, user-friendly features, and eco-friendly designs, they offer great value for those seeking reliable air conditioning solutions. Both models exemplify Danby’s commitment to quality, performance, and customer satisfaction.