Troubleshooting, 800-26 | Danby DAC5210M, DAC5110M specs

TROUBLESHOOTING

Occasionally, a problem may occur that is minor, and a service call may not be necessary. Use this troubleshooting guide for a possible solution. If the unit continues to operate improperly, call an authorized service depot or Danby’s Toll Free Number for assistance:

	1-800-26-	(1-800-263-2629)

PROBLEM	POSSIBLE CAUSE		SOLUTIONS

			• Check connection of power cord to power
			source.
1) Air conditioner will not	• No power to the unit.		• Check fuse or circuit breaker.
1) Air conditioner will not	• No power to the unit.		• Set SELECTOR SWITCH to position other
operate.			• Set SELECTOR SWITCH to position other
operate.			than “OFF”.
			• The power cord “RESET” button must always
			be pushed in (engaged) for correct operation.

	• Dirty air filter.		• Clean/replace air filter.
	• Dirty air filter.		• Check with dealer to determine proper unit
2) Inefficient or no cooling.	• Unit size inappropriate for application.		capacity for application.
2) Inefficient or no cooling.	• Blocked air flow.		• Remove obstruction from grill or outdoor
	• Power interruption, settings changed too		louvres.
	quickly, or compressor overload tripped.		• Turn the unit off and wait 5 minutes before
			attempting to restart.
3) Noisy unit.	• Loose parts.		• Tighten loose parts.
3) Noisy unit.	• Inadequate support.		• Provide additional support to unit.
	• Inadequate support.		• Provide additional support to unit.
4) Odors.	• Formation of mold, mildew, or algae on		• Clean unit thoroughly.
4) Odors.	wet surfaces.		• Place algaecide tablet in base pan.
	wet surfaces.		• Place algaecide tablet in base pan.
5) Water dripping outside.	• Hot and humid weather.		• Condensation run-off is normal under these
5) Water dripping outside.	• Hot and humid weather.		conditions.
			conditions.
6) Water dripping inside.	• Unit is not properly angled to allow		• Unit must be installed on an angle for proper
6) Water dripping inside.	water to drain outside.		condensation run-off. Check the unit and
			make any adjustments.

			• When outdoor temperature is approximately
7) Ice or frost build-up	• Low outside temperature.		18.3°C (65°F) or below, frost may form
	• Low outside temperature.		when unit is in cooling mode. Switch unit to
	• Unit air filter is dirty.		when unit is in cooling mode. Switch unit to
	• Unit air filter is dirty.		FAN (only) operation until frost melts.
			FAN (only) operation until frost melts.
			• Remove and clean filter.

NOTES:

1)If circuit breaker is tripped repeatedly, or fuse is blown more than once, contact a qualified technician.

2)When unit is installed using proper installation steps, unit is properly tipped toward the outdoors to allow for condensation run-off.

DAC5110M, DAC5210M specifications

The Danby DAC5110M and DAC5210M are two versatile air conditioning units designed to provide effective cooling solutions for residential and small commercial spaces. Both models come equipped with a range of features and technologies that enhance their functionality, efficiency, and user-friendliness.

The DAC5110M is a compact 5000 BTU window-mounted air conditioner that is ideal for single rooms or small spaces up to 150 square feet. Its lightweight design makes installation a breeze, and it fits easily into most standard windows. This model is equipped with a mechanical thermostat that allows users to select their desired temperature easily. The unit also features a 2-speed fan and a 2-way air direction control, providing flexibility in airflow distribution.

On the other hand, the DAC5210M is a more powerful 5200 BTU window air conditioner that can cool areas up to 250 square feet. Like the DAC5110M, it also offers a mechanical thermostat and adjustable fan speeds, but it includes additional features such as a 24-hour programmable timer, which allows users to set the unit to turn on or off at specific times, promoting energy efficiency.

Both models are equipped with multiple cooling and fan speeds, allowing users to customize their comfort level according to their specific preferences. The energy-efficient design of these air conditioners complies with Energy Star requirements, ensuring that they consume less electricity compared to traditional units. This not only helps in reducing energy bills but also minimizes the environmental impact.

Another significant feature of the Danby DAC5110M and DAC5210M is the easy-to-clean, washable air filter, which helps maintain good air quality by trapping dust and allergens. Regular maintenance of the filter extends the lifespan of the unit and ensures optimal performance.

Moreover, both units are designed with user convenience in mind. Each model includes a remote control option, allowing users to adjust settings from across the room without needing to get up. The quiet operation of these air conditioners is another advantage, making them suitable for bedrooms and workspaces where noise can be disruptive.

In conclusion, the Danby DAC5110M and DAC5210M are commendable additions to any home or small office space. With their efficient cooling capacities, user-friendly features, and eco-friendly designs, they offer great value for those seeking reliable air conditioning solutions. Both models exemplify Danby’s commitment to quality, performance, and customer satisfaction.

TROUBLESHOOTING

1-800-26-

PROBLEM

POSSIBLE CAUSE

SOLUTIONS

DAC5110M, DAC5210M specifications