Simple steps to use cooling mode | Brada Appliances YPM-06C manual

OPERATING INSTRUCTION

1. Simple steps to use cooling mode

Plug in the power cord and press the “POWER” button Press “MODE” to chose COOLING mode.

Press “UP” or “DOWN“ to set the desired temperature. The temperature ranges from 59F to 86F(15C~30C)

Press, “SPEED” to set a desired fan speed.

The fan will run first. After few minutes, the compressor will start to run if the room temperature is higher then the setting temperature. The compressor will stop running when the room temperature is below the setting temperature.

2.Setting the timer

(1)Turn off the unit automatically:

When the unit is running, press TIMER to set operating duration, and then the LED will flash five times. During this period of time, press Up or Down button to adjust setting time from 0.5 hr. to 24 hr. After setting, the LED will flash five times and then display the room temperature again. When the operating duration reaches the pre-set time, the power will turn off automatically.

(2)Turn on the unit automatically:

When the unit is off, press TIMER to set start time, and then the LED will flash five times. During this period of time, press Up or Down button to adjust setting time from 0.5 hr. to 24 hr. After setting, the LED will flash five times and then display the temperature again. Once the pre-set time is reached, the power will turn on automatically.

(3)Change the setting:

When TIMER is on, you can check the remaining time by pressing the TIMER button. It will flash five times. Press Up or Down button to adjust the timer. The timer can be canceled if you press the TIMER button once again when LED is flashing.

Attention:

If the unit is suddenly turned off during operation, the compressor will start to run three minutes after the power is turned back on.

3.Setting operating mode

COOLING: When this mode is selected, the fan will run first and then the compressor will start to run five minutes after the power is on. To set your desired temperature, press UP or DOWN button. The temperature ranges from 15C~30C (59F~86F). When the room temperature is lower than the setting temperature, the compressor will stop running until the room temperature is higher than setting temperature. In this case, only the fan will keep running.

FAN: When this mode is selected, the temperature setting cannot be changed, but you can set your desired speed. There is no need to use the air exhaust duct in this mode.

DEHUMIDIFING: When this mode is selected, it presets the fan speed and mode, and these settings cannot be changed. Under this mode, the compressor will not run, and LED will display room temperature. There is no need to use the air exhaust duct. You may need to drain water with the drain pipe if the humidity is very high.

4 .Setting temperature

In COOLING mode, press the “UP” button to increase the temperature setting or press the “DOWN

“button to lower the temperature setting. When the number is flashing, it indicates the temperature you are setting up. When the number is lit but not flashing, it indicates the current room temperature.

5.Setting fan speed

In COOLING and FAN mode, press “SPEED” to adjust the fan speed. There are high, medium and low modes. Each fan speed corresponds to one indicator on LED control panel. Please note: when unit is in dehumidifier mode, the fan speed cannot be adjusted.

- 10-

YPM-06C specifications

The Brada Appliances YPM-06C is a compact and efficient appliance designed for modern kitchens, offering versatility and user-friendly features that make cooking a pleasurable experience. This multi-functional device combines the efficiency of a traditional rice cooker with the capabilities of a steamer, slow cooker, and warmer, making it an essential addition to any household.

One of the standout features of the YPM-06C is its user-friendly digital interface. The large, easy-to-read LED display allows users to navigate between various cooking modes effortlessly. With pre-programmed functions, users can choose settings for cooking rice, steaming vegetables, or slow cooking stews with just the touch of a button, significantly reducing preparation time and ensuring consistent results.

The YPM-06C boasts a robust 6-cup cooking capacity, making it suitable for both small families and meal prep enthusiasts. The non-stick inner pot ensures easy cleanup while also promoting even heat distribution for perfect cooking results. Additionally, the removable inner lid allows for easy maintenance, ensuring the appliance stays in top condition.

In terms of technology, the Brada YPM-06C incorporates advanced heat retention capabilities, allowing it to maintain optimal cooking temperatures. Its smart cooking technology automatically adjusts cooking time based on the amount of food and cooking mode selected, ensuring that dishes are cooked to perfection every time. Furthermore, the appliance features a built-in safety mechanism that prevents overheating, providing peace of mind during use.

Another notable characteristic of the YPM-06C is its versatility beyond just rice cooking. The steamer function allows users to prepare healthy meals, preserving essential nutrients while cooking vegetables, fish, or dumplings. The slow cooker mode is perfect for those who enjoy preparing hearty soups or tender meats, allowing flavors to meld over time without constant supervision.

Furthermore, the appliance includes a warm setting that keeps meals at an ideal serving temperature without compromising quality. This is particularly beneficial for busy families who might need to prepare meals in advance and wish to enjoy them later in the day.

In summary, the Brada Appliances YPM-06C is a reliable, multifunctional kitchen helper that promises to simplify meal preparation. With its intuitive design, advanced cooking technologies, and versatile features, it caters to culinary enthusiasts and everyday cooks alike, making it an excellent investment for anyone looking to elevate their kitchen experience.