Operation
1. Control panel | 2 | 5 | 3 |
|
1
4
7 | 6 | |
2．On/Off switch button | ||
|
Press On/Off button once the power is on, the unit will run at auto mode. Press On/Off button while the unit is running, the unit stops, and timer setting is canceled, other information (mode, set temp, and fan speed) remain in the machine.
3. Mode button
Press Mode button, unit run mode will change at sequence of： AUTO, COOL,， DEHUMIDIFY and To should of the LED light is bright.
4. FAN SPEED button
Press SPEED button, unit run mode will change in sequence of: HIGH, MID, LOW and to should of the LED light is bright.
5. TEMP UP, DOWN button
Press TEMP button to adjust desired room temperature and it will display
in LED window correspondingly, the temperature adjustment range is
Press the TEMP UP、DOWN button at the same time，the temperature display will be shown between °C and °F.
6.TIMER button
TIMER OFF:
When unit under running mode, press timer button to set desire OFF time,
time set from 0.5 hour to 12 hours, the timer setting will display in LED window correspondingly
TIMER ON:
When unit is ready, press TIMER button to set desire ON time, time set from 0.5 hour to 12 hours, the timer setting will display in LED window correspondingly
7.SWING button
When unit under running mode, press swing button to auto adjust a right and left direction of wind.