Deltaco 50-868 instruction manual Using the AIR Cleaner on a Bench or Floor Surface

Page 6

USING THE AIR CLEANER ON A BENCH OR

FLOOR SURFACE

1.Locate (4) self-adhesive rubber feet (A) Fig. 3, supplied with the unit. Carefully place Air Cleaner on a firm supporting surface with access to the bottom of the cabinet Apply a self-adhesive rubber foot (A) Fig. 3, to the bottom at each corner of the air cleaner cabinet. The rubber feet will help eliminate vibration and will prevent the possibility of the air cleaner “walking” across the work or floor surface.

For operator safety, clamp the unit to a work bench or position it securely on sawhorses.

A

Fig. 3

2.The air cleaner cabinet has convenient lifting handles located on either side (one of which is shown at (A) in Fig. 4.

To avoid damage to the air filters, carry the air cleaner with the filters positioned away from your body.

This unit weighs 50 pounds.

A

Fig.4

MOUNTING THE AIR CLEANER TO THE CEILING OR

OVERHEAD SUPPORT

This machine weighs 50 pounds. When mounting overhead, be certain that the unit is secure- ly fastened and supported.

6

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Air Cleaner General Safety Rules Additional Safety Rules for AIR CleanersRead and Save These Instructions Extension Cords IntroductionUnpacking Carton Contents Using the AIR Cleaner on a Bench or Floor Surface Page Using the Remote Control OperationsMaintenance AccessoriesPARTS, Service or Warranty Assistance Canadian PORTER-CABLE Delta Service Centers
Top Page Image Contents