MAINTENANCE
CHANGING AND CLEANING FILTERS
1.To remove the outer first stage filter (A) Fig. 8, lift and pull out the bottom of the filter as shown.
2.Remove inner bag filter (B) Fig. 9 in the same manner.
3.The first stage filter can be replaced or cleaned depending on its condition. Clean this filter in one of two ways: Use a shop vac to remove the dust, or use compressed air (30 psi maximum) to blow the dust out of the filter.
Compressed air can be dangerous. For operator safety, do not exceed an air pressure of 30 psi. do not point the air nozzle toward yourself or anyone else. always wear safety glasses and a dust mask when using compressed air.
4.The inner bag filter is disposable and must be replaced. DO NOT try to clean it.
5.Reinstall the filters by placing the top of the filter in first and lifting on the bottom to get it into position.
NOTE: The air flow arrow on the outer filter must point inward toward the rear of the air cleaner. Location of the air flow arrow is shown at fig. 10.
A
Fig. 8
A
B
Fig. 9 | Fig. 10 |
ACCESSORIES
A complete line of accessories is available from your Delta Supplier,
Since accessories other than those offered by Delta have not been tested with this product, use of such accessories could be hazardous. For safest operation, only Delta recommend- ed accessories should be used with this product.
9