Genie AG_05, AG_06 owner manual USE of Adapter Plugs -115-Volt models only

Page 4

Instructions

IMPORTANT SAFETY INFORMATION. READ ALL INSTRUCTIONS BEFORE USING.

WARNING!

USE OF EXTENSION CORDS –115-Volt models only

Instructions Safety

Because of potential safety hazards under certain conditions, we strongly recommend against the use of an extension cord.

However, if you must use an extension cord, it is absolutely necessary that it be a UL-listed, 14 gauge, 3-wire grounding type appliance extension cord having a grounding type plug and outlet and that the electrical rating of the cord be 15 amperes (minimum) and 125 volts.

CAUTION:

DO NOT use an extension cord with any of the 230/208 volt models.

USE OF ADAPTER PLUGS –115-Volt models only

Because of potential safety hazards under certain conditions, we strongly recommend against the use of an adapter plug.

However, if you must use an adapter, where local codes permit, a temporary connection may be made to a properly grounded 2-prong wall outlet by use of a UL-listed adapter available at most local hardware stores.

The larger slot in the adapter must be aligned with the larger slot in the wall outlet to provide proper polarity in the connection of the power cord.

When disconnecting the power cord from the adapter, always hold the adapter in place with one hand while pulling the power cord plug with the other hand. If this is not done, the adapter ground terminal is very likely to break with repeated use.

If the adapter ground terminal breaks, DO NOT USE the air conditioner until a proper ground has been established.

Attaching the adapter ground terminal to a wall outlet cover screw does not ground the appliance unless the cover screw is metal, and not insulated, and the wall outlet is grounded through the house wiring. You should have the circuit checked by a qualified electrician to make sure the outlet is properly grounded.

Troubleshooting Tips Installation Instructions Operating

Customer Service

Read and follow this Safety Information carefully.

SAVE THESE INSTRUCTIONS

4

Page 3 Page 5
Image 4
Page 3 Page 5
Contents 3828A30036N Pub. No -7389 JRGE & You, a Service Partnership Two easy ways to register your applianceSafety Precautions Read and follow this Safety Information carefully USE of Adapter Plugs -115-Volt models onlyMode Control About the controls on the air conditionerControls Temp ControlCare and cleaning of the air conditioner Air DirectionAir Filter Outdoor CoilsTo remove the front grille Front Grille and CaseTo replace the grille Preparing to install the air conditioner Before You BeginElectrical Requirements Tools You Will NeedWindow Installation Instructions Parts IncludedWindow Requirements Storm Window RequirementsInstall the Support Bracket Prepare the Window and the CaseInstall the Air Conditioner in the Window Install the Window Gasket and the Locking Bracket Before you call for service… Normal Operating SoundsSafety Instructions CustomerService We’ll Cover Any Appliance. Anywhere. Anytime Consumer Product Ownership Registration Air Conditioner Warranty GE Will ReplaceWhat GE Will Not Cover One YearService Telephone Numbers

AG_05, AG_06 specifications

Genie AG_06 and AG_05 are cutting-edge aerial work platforms designed for optimal efficiency, safety, and versatility in various industrial applications. These models are part of Genie’s growing portfolio of equipment aimed at meeting the diverse needs of construction, maintenance, and warehousing sectors.

The Genie AG_06 represents a significant advancement in aerial lift technology. It features a maximum working height of 20 feet, making it ideal for both indoor and outdoor tasks. The platform is equipped with a compact design that allows it to navigate tight spaces effectively. One of its standout characteristics is its advanced traction control system, which enhances stability and maneuverability on uneven surfaces. The AG_06 is powered by a robust electric motor, reducing noise and emissions—perfect for use in sensitive environments.

On the other hand, the Genie AG_05 is designed for light-duty applications, reaching up to 15 feet in height. This model prioritizes user-friendliness, boasting an easy-to-use control interface that simplifies operation for various skill levels. The AG_05 features a lightweight construction, making it easier to transport and set up on different job sites. It is also equipped with a built-in safety mechanism that prevents accidental descent, providing operators with peace of mind while working at height.

Both models utilize state-of-the-art technology to ensure operator safety and efficiency. Their non-marking tires are suitable for a variety of surfaces, preventing damage to floors, which is particularly beneficial in indoor environments. In addition, the platforms come equipped with guardrails and harness attachment points, complying with rigorous safety standards.

In terms of maintenance, Genie has integrated user-friendly access points, allowing for quicker inspections and servicing. This reduces downtime, ensuring that the equipment remains operational and efficient throughout its lifecycle. Both AG_06 and AG_05 are compatible with Genie’s telemetry system, which enables remote diagnostics and performance tracking, further enhancing operational management.

When it comes to versatility, both AG_05 and AG_06 can be utilized across a range of applications, from electrical and maintenance work to inventory management. Their design reflects Genie’s commitment to innovation and sustainability, which aims to provide reliable, effective solutions for today's dynamic work environments.
Top Page Image Contents