Genie AG_06, AG_05 Front Grille and Case, To remove the front grille, To replace the grille

Page 7

Front Grille and Case

Turn the air conditioner off and remove the plug from the wall outlet before cleaning.

To clean, use water and a mild detergent. Do not use bleach or abrasives.

To remove the front grille:

ARemove the knobs. Then remove the screw beneath the bottom knob. Press in on the lower left side of the case and pull the grille forward.

BGently press inward on the right side of the case and pull the lower right side of the grille forward to release from the slot.

CLift the top of the grille up and off to release from the tabs.

To replace the grille:

AHook the front of the grille onto the tabs on the top of the case.

BSnap the bottom right side of the grille into the case slot.

CSnap the bottom left side of the grille into the case slot and replace the screw. Attach the knobs.

Safety Instructions Operating Instructions Installation Instructions Troubleshooting Tips

Customer Service

Image 7

Contents Pub. No -7389 JR 3828A30036NTwo easy ways to register your appliance GE & You, a Service PartnershipSafety Precautions USE of Adapter Plugs -115-Volt models only Read and follow this Safety Information carefullyTemp Control Mode ControlAbout the controls on the air conditioner ControlsOutdoor Coils Care and cleaning of the air conditionerAir Direction Air FilterTo remove the front grille Front Grille and CaseTo replace the grille Tools You Will Need Preparing to install the air conditionerBefore You Begin Electrical RequirementsParts Included Window Installation InstructionsStorm Window Requirements Window RequirementsPrepare the Window and the Case Install the Support BracketInstall the Air Conditioner in the Window Install the Window Gasket and the Locking Bracket Normal Operating Sounds Before you call for service…Safety Instructions CustomerService We’ll Cover Any Appliance. Anywhere. Anytime Consumer Product Ownership Registration One Year Air Conditioner WarrantyGE Will Replace What GE Will Not CoverService Telephone Numbers

AG_05, AG_06 specifications

Genie AG_06 and AG_05 are cutting-edge aerial work platforms designed for optimal efficiency, safety, and versatility in various industrial applications. These models are part of Genie’s growing portfolio of equipment aimed at meeting the diverse needs of construction, maintenance, and warehousing sectors.

The Genie AG_06 represents a significant advancement in aerial lift technology. It features a maximum working height of 20 feet, making it ideal for both indoor and outdoor tasks. The platform is equipped with a compact design that allows it to navigate tight spaces effectively. One of its standout characteristics is its advanced traction control system, which enhances stability and maneuverability on uneven surfaces. The AG_06 is powered by a robust electric motor, reducing noise and emissions—perfect for use in sensitive environments.

On the other hand, the Genie AG_05 is designed for light-duty applications, reaching up to 15 feet in height. This model prioritizes user-friendliness, boasting an easy-to-use control interface that simplifies operation for various skill levels. The AG_05 features a lightweight construction, making it easier to transport and set up on different job sites. It is also equipped with a built-in safety mechanism that prevents accidental descent, providing operators with peace of mind while working at height.

Both models utilize state-of-the-art technology to ensure operator safety and efficiency. Their non-marking tires are suitable for a variety of surfaces, preventing damage to floors, which is particularly beneficial in indoor environments. In addition, the platforms come equipped with guardrails and harness attachment points, complying with rigorous safety standards.

In terms of maintenance, Genie has integrated user-friendly access points, allowing for quicker inspections and servicing. This reduces downtime, ensuring that the equipment remains operational and efficient throughout its lifecycle. Both AG_06 and AG_05 are compatible with Genie’s telemetry system, which enables remote diagnostics and performance tracking, further enhancing operational management.

When it comes to versatility, both AG_05 and AG_06 can be utilized across a range of applications, from electrical and maintenance work to inventory management. Their design reflects Genie’s commitment to innovation and sustainability, which aims to provide reliable, effective solutions for today's dynamic work environments.