840117900 ENv00 8/27/03 11:28 AM Page 5
Using the Allergen Reducer
Before First Use: Be sure to remove all packing materials. The filter is packed in a plastic bag inside the Allergen Reducer for shipping.
1.For model 04381: To remove the front grille,
press on the grille release buttons on each side of the grille and pull towards you.
For model 04371: To remove the front grille, 
grasp each
side of the
grille and pull towards you.
2.Remove the plastic bag from the filter then replace the filter in the unit.
3.To close the front grille of the Allergen Reducer, position the grille on the front of the unit and push until it snaps into place.
4.Ensure the Allergen Reducer is in the OFF position.
5.Plug in the Allergen Reducer.
6.Select desired fan speed.
NOTES:
•The life of the filter is determined by use. If the Allergen Reducer is used continuously, it may need to be replaced after 1 month. If only used occasionally, it may last up to 4 months.
•Filter life will depend on use and allergy season.
Replacing the Filter
1.Turn off and unplug Allergen Reducer. Remove the front grille then remove the used filter by grip- ping the sides and pulling outward. Discard the used filter. It cannot be cleaned.
2.Obtain a replacement filter. Insert the unwrapped filter.
NOTE: Improper filter installation will result in poor air filtration.
To Order Replacement Filters
The Allergen Reducer is designed to filter the room three times per hour at high speed. Factors such as room shape and ceiling height can affect this rate. It is normal that the air flow will be reduced as the filter becomes clogged. Replace the filter as needed.
To order replacement filters, call Customer Service:
U.S. at
Canada at 1-800-267-2826
Purifier | Room Size |
|
Model | (sq. ft.) | Filter |
|
|
|
04371 | 110 ft2 | 04711 |
|
|
|
04381 | 210 ft2 | 04712 |
5