Heatcraft Refrigeration Products TLH, TLL manual Features & Benefits

Page 3

Features & Benefits

Cabinet

Air moves across the ceiling in both directions providing even air distribution throughout the cooler

Compact, ceiling mount and center mount design allows for shelving and storage of product around all walls

Heavy-gauge grained aluminum cabinet cleans easily and looks attractive

Stainless steel screws prevent rust streaks

Panels on ends quickly remove for complete access to refrigerant components and electrical terminal block during installation and servicing

Quick disconnect, waterproof plug and receptacle for each motor in all models

Wire fan guards with PVC coating for durability

Coil

High-efficiency aluminum fins with full collars cover mechanically expanded copper tubes

Coils are dehydrated and sealed at the factory

Highest quality tubular heaters provide fast and economical defrost

Generous coil surface gives proper compressor balance

Standard adjustable defrost termination fan delay thermostat

Drain Pan

Double drain pan eliminates drain pan sweating

Tapered mounting provides proper slope for condensate drainage to one end of the unit

Motors

Motors are life lubricated and thermal overload protected

EC motors (optional) available factory-installed or as a drop-in replacement through InterLink™ Commercial Refrigeration Parts in 115/1/60, 208-230/1/60 voltages

PSC motors are optional for 115/1/60, 208-230/1/60 voltages

PSC motors or EC motors are required for 50 Hz operation

Options

Unit Configurations: mounted components, pre-assembled, pre-charged and Beacon II™

-Units available with mounted TXV and mounted TXV / solenoid valve

-Pre-assembled units come with mounted TXV, liquid line solenoid valve and room thermostat

- Pre-charged units come with mounted TXV, liquid line solenoid valve, room thermostat and quick

connect fittings

-Mounted room thermostat

-Beacon II units come with electronic expansion valves, pressure transducer, temperature sensors and Beacon control board

Units available with stainless steel housing and drain pan

Units available with copper fins. Air defrost units also available with polyester coated fins or various coil coatings options

All Chandler Center Mount units are UL-listed for US and Canada and meet NSF standards.

Image 3
Contents Technical Guide Nomenclature Table of ContentsFeatures & Benefits Model TLL Electric Defrost 60 Hz Performance DataModel TLH Air Defrost 60 Hz Model TLH Air Defrost 50 Hz†Model Shaded Pole PSC Motor EC Motor SpecificationsModel TLH Air Defrost 50 Hz Model TLL Electric Defrost 50 HzPhysical Data Dimensional DataStandard Nozzle Selection Replacement PartsFAX