Plantronics W745 Headset Features

1Volume/Mute button

Increase the volume Press the volume button up

Decrease the volume Press the volume button down

Mute/unmute a call To mute/unmute the headset, press the volume/mute button in

Flash between calls During a call, long press the volume button up or down for 1.5 seconds

2Call button

Place, answer, end a call Short press the call control button

3Headset LED Flashes white when in use

CAUTION For your safety, do not use headset at high volumes for extended periods of time. Doing

so can cause hearing loss. Always listen at moderate levels. For more information on headsets and

hearing visit plantronics.com/healthandsafety.

If the headset battery is installed and charged, the headset is automatically on. The headset

does not have an on/off button. If you won’t be using the headset for a long period of time and

the headset will not be in the charging cradle, place the headset in sleep mode or remove the

battery.

Place the Headset in Sleep Mode

Placing the headset in sleep mode with a fully charged battery will provide up to 50 hours of

standby time.

1While the headset is idle, press the call button for three seconds until you see the headset flash

white twice.

2To wake the headset, press the call button again until you see two white flashes or hear three

high tones.

Battery Storage Time

If you remove a fully charged battery from the headset, it will provide up to 75 days of battery

storage time, stored under normal conditions.

Talk Time

With a single full charge, the headset will provide up to 7 hours of continual talk time. Talk time

will be reduced when operating in wideband mode and/or if the headset is used consistently at

a long distance from the base. You can replace the battery mid-call, without losing the call, as

long as a charged battery is reattached within 5 minutes. This allows for unlimited talk time.

Headset Features