Redring 1070810E, 1070835E Tank access and replacing parts con’t, Drilled in the condensor tube

Redring SB

Tank access and replacing parts con’t.

Task	Operation
Replace Thermistor Steam Sensor	1.	Directions as above in Cover Removal.
	2.	Remove PCB cover plate.
	3.	Remove the thermistor.
	4. The probe end of the thermistor pushes into the
		condensor tube so that the tip just covers the hole
		drilled in the condensor tube.
	5.	Re-connect the sensor to the PCB at either NTC 1 or
		NTC 2, in any order.

Condensor Tube Sensor Probe

Page 6 of 8