Wet Nozzle WD1200 only | RIDGID WD1230 instruction

WD1200/30 RIDGID MANUAL (12001 3/16/01 4:23 PM Page 11

Wet Nozzle (WD1200 only)

To pick up liquids off a smooth surface, use the 2-1/2" wet nozzle accessory sup- plied with your wet/dry vac. To use, simply attach the nozzle to the end of an exten- sion wand.

Connect a second extension wand to the first, and connect the 2-1/2" x 7' hose to the extension wand.

Liquids may be picked up by dragging the nozzle across the surface. The squeegee will dry the surface as you vacuum.

If the rubber becomes worn, it may be flipped over for use on the opposite side or replaced. (Replacement service part #822256). To reverse or replace the squeegee:

1.Lay the wet nozzle on a flat surface with the round inlet opening facing up and

the two latches close to you as shown.

Latches

Nozzle

Body

Removable

Insert

2.Using both hands, position each thumb on the removable insert, (below the latches) and two fingers of each hand on each latch, lift and disengage the two latches from the tabs on the nozzle body.

3.Gently pull the latches toward yourself to remove the insert.

To reinstall the removable insert correctly, follow these steps:

1.Place the removable insert on a flat sur- face with the pins positioned upward and the latches close to you as shown. Place the rubber squeegee on the insert, with the pins fitting through the matching holes in the squeegee. (Make sure the new working edge is located farthest from you.)

2.Using both hands, lower the nozzle body onto the insert and squeegee with the round opening of the nozzle closest to you. With fingers on the far side and thumbs holding the latches of the removable insert, flip the nozzle over so the latches are on the top and the round inlet opening is facing away from you. Make sure the squeegee stays on the insert pins.

3.Press down with each thumb below the latching tabs until you see and hear the removable insert snap into the nozzle body. Snap the latches over the locking tabs into their original position.

4.Inspect the pins of the insert to make sure they fit through the holes of the squeegee and fit into the matching slots in the nozzle body.

NOTE: If the pins are out of position, hold the nozzle assembly with both hands and gently twist in opposite directions. The insert pins should snap into proper position.

Twist			Twist
Backward			Forward

The wet nozzle assembly is ready for wet pickup use.

WD1230, WD1200 specifications

The RIDGID WD1230 and WD1200 are industry-leading wet/dry vacuums designed for both professionals and DIY enthusiasts, offering unparalleled performance and versatility for a variety of cleaning applications. With their robust construction and innovative technologies, these vacuums are well-suited for tackling debris in workshops, garages, and construction sites.

One of the standout features of the RIDGID WD1230 is its powerful motor, which provides an impressive suction capacity of 6.0 peak horsepower. This enables users to pick up a wide range of materials, from fine dust and sawdust to larger debris, ensuring a thorough clean every time. Similarly, the WD1200, while slightly less powerful, still boasts a commendable 5.0 peak horsepower motor, making it an excellent choice for light to medium-duty cleaning tasks.

Both models are equipped with a durable, high-capacity polypropylene tank capable of holding 12 gallons of liquid waste. This large capacity ensures that users can work for extended periods without needing to empty the tank frequently. Additionally, they have designed these vacuums with a focus on ergonomics and ease of use. The WD1230 and WD1200 feature top-mounted handles and an integrated push handle, making it easy for users to move them around the job site or workshop.

Another notable technology present in both models is the advanced filtration system. Each vacuum comes with a proprietary multi-layer filter that captures 99% of fine dust particles, ensuring cleaner exhaust air. This feature is particularly beneficial for users with allergies or sensitivities to dust. Furthermore, the vacuums include a patented wet/dry filter that can be easily cleaned and reused, saving users money in the long run.

Portability is another key characteristic of the RIDGID WD1230 and WD1200. Each vacuum is mounted on sturdy swivel casters that provide excellent maneuverability, while the large rear wheels make it easy to navigate over obstacles. For convenience, both models come with a variety of accessories, including a 7-foot power cord, extension wands, and multiple nozzle attachments that make them adaptable for different cleaning tasks.

Lastly, RIDGID offers a lifetime warranty on the motor and housing, reflecting the brand’s commitment to quality and customer satisfaction. In summary, the RIDGID WD1230 and WD1200 represent a perfect blend of power, capacity, and user-friendly design, making them essential tools for anyone looking to keep their workspace spotless.