RIDGID WD1200, WD1230 owner manual Float/Cage Assembly, Filter Assembly, Filter Nut Cage

Page 5

WD1200/30 RIDGID MANUAL (12001 3/16/01 4:23 PM Page 5

Float/Cage Assembly

WARNING: For your own safety, never connect plug to power source outlet until all assembly steps are complete and you have read and understood the safety and operation instructions. Do not operate vac with any parts damaged or missing.

1.Place the lid assembly of vac upside down into the drum or on a clean smooth surface.

2.Locate the float. Place the float over the opening in the center of the lid with the words “This Side Towards Lid” laying face down over the hole.

WARNING: To reduce the risk of per- sonal injury or damage to vac be sure to keep hands, fingers, or any other foreign objects out of the cen- ter opening when assembling the float.

3.Line up filter cage tabs with the slots in the center ring of the lid assembly.

4.Push on the filter cage until the tabs snap into the slots for a secure fit.

NOTE: If filter cage needs to be removed, because the float is placed in the wrong way, use a slotted screwdriver and insert the blade near one of the tabs between the filter cage and the center ring of the lid. Pry the tab out of the slot. Tilt the cage and lift away from the lid. To replace, fol- low float/cage assembly instructions.

Filter Cage

Tabs

Float

Solid

End

Lid

Assembly

Filter Cage

Tabs (3)

Slots (3)

Filter Assembly

1.Carefully slide the filter over the filter cage, lining up hole in filter with threaded stud and sliding it over the center ring covering the 3 slots until the filter stops against the lid.

2.Place filter nut onto threaded screw and tighten it down. Finger tighten only.

NOTE: Lever of filter nut should be away from filter as shown.

IMPORTANT: Do not overtighten as this may deform or crack the filter cage.

Filter Nut

Filter

Filter

Cage

5

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Gallons WET/DRY VAC Table of Contents Important Safety InstructionsExtension Gauge Cord Length Double Insulated Grounding not RequiredIntroduction Unpacking and Checking Carton ContentsCaster/Caster Foot Assembly Filter Assembly Float/Cage AssemblyFilter Cage Tabs Float Solid End Lid Assembly Slots Filter Nut CageWD1200 Vac AssemblyTo Store Your Accessories Vacuuming Dry Materials OperationVacuuming Liquids Blowing FeatureEmptying the Drum Moving the VacMaintenance Wet Nozzle WD1200 only Servicing of DOUBLE-INSULATED WET/DRY VAC Repair PartsModel Number WD12001 or WD12300 WD1200/30 Ridgid Manual 12001 3/16/01 423 PM WD1200/30 Ridgid Manual 12001 3/16/01 423 PM Emerson Electric Co Lifetime Warranty On Ridgid ToolsStock No. WD1200 or WD1230 Model No. WD12001 or WD12300

WD1230, WD1200 specifications

The RIDGID WD1230 and WD1200 are industry-leading wet/dry vacuums designed for both professionals and DIY enthusiasts, offering unparalleled performance and versatility for a variety of cleaning applications. With their robust construction and innovative technologies, these vacuums are well-suited for tackling debris in workshops, garages, and construction sites.

One of the standout features of the RIDGID WD1230 is its powerful motor, which provides an impressive suction capacity of 6.0 peak horsepower. This enables users to pick up a wide range of materials, from fine dust and sawdust to larger debris, ensuring a thorough clean every time. Similarly, the WD1200, while slightly less powerful, still boasts a commendable 5.0 peak horsepower motor, making it an excellent choice for light to medium-duty cleaning tasks.

Both models are equipped with a durable, high-capacity polypropylene tank capable of holding 12 gallons of liquid waste. This large capacity ensures that users can work for extended periods without needing to empty the tank frequently. Additionally, they have designed these vacuums with a focus on ergonomics and ease of use. The WD1230 and WD1200 feature top-mounted handles and an integrated push handle, making it easy for users to move them around the job site or workshop.

Another notable technology present in both models is the advanced filtration system. Each vacuum comes with a proprietary multi-layer filter that captures 99% of fine dust particles, ensuring cleaner exhaust air. This feature is particularly beneficial for users with allergies or sensitivities to dust. Furthermore, the vacuums include a patented wet/dry filter that can be easily cleaned and reused, saving users money in the long run.

Portability is another key characteristic of the RIDGID WD1230 and WD1200. Each vacuum is mounted on sturdy swivel casters that provide excellent maneuverability, while the large rear wheels make it easy to navigate over obstacles. For convenience, both models come with a variety of accessories, including a 7-foot power cord, extension wands, and multiple nozzle attachments that make them adaptable for different cleaning tasks.

Lastly, RIDGID offers a lifetime warranty on the motor and housing, reflecting the brand’s commitment to quality and customer satisfaction. In summary, the RIDGID WD1230 and WD1200 represent a perfect blend of power, capacity, and user-friendly design, making them essential tools for anyone looking to keep their workspace spotless.
Top Page Image Contents