RIDGID WD1250 manual Replacement Filter Assembly

Page 5

SP6663 12 GALLON.qxd 3/16/07 8:57 AM Page 5

Replacement Filter Assembly

1.Carefully slide the filter over the filter cage, sliding it over the center ring covering the 3 slots until the filter stops against the lid.

2.Place filter nut and filter plate onto threaded stud and tighten it down. Finger tighten only.

NOTE: Lever of filter nut should be away from plate as shown.

IMPORTANT: Do not overtighten as this may deform or crack the filter cage, or filter.

NOTE: If filter cage or float needs to be replaced or removed, use a flat blade screwdriver and insert the blade near one of the tabs between the filter cage and the center ring of the lid. Pry the tab out of the slot. Tilt the cage and lift away from the lid. To replace, follow the assembly instructions below:

!WARNING: For your own safety, never connect plug to power source outlet until all assembly steps are complete and you have read and understood the safety and operation instructions. Do not operate vac with any parts damaged or missing.

3.Place the float over the opening in the center of the lid with the words "This Side Towards Lid" laying face down over the hole.

!WARNING: To reduce the risk of personal injury or damage to vac be sure to keep hands, fingers, or any other foreign objects out of the center opening when assembling the float .

4.Line up filter cage tabs with slots in the center ring of the lid.

5.Push on the filter cage until the tabs snap into slots for a secure fit.

Filter Nut

Filter Nut

Lever

Filter Plate

 

Filter

 

Threaded Stud

 

Filter Cage

 

Slots (3)

Filter Cage

Tabs (3)

Power

Float Assembly

Solid End

THIS SIDE

TOWARD LID

Slots (3)

Filter Cage

Tabs (3)

Slots (3)

5

Page 4 Page 6
Image 5
Page 4 Page 6
Contents OPERATOR’S Manual Table of Contents Important Safety InstructionsExtension Cord Length Gauge A.W.G Save this ManualIntroduction Unpacking and Checking Carton ContentsCaster/Caster Foot Assembly Replacement Filter Assembly Insert Hose Wet/Dry Vac AssemblyCord Storage = on To Store Your AccessoriesOperation Emptying the Drum Vacuuming Dry MaterialsVacuuming Liquids Moving the Wet/Dry Vac Cord MaintenanceBlowing Feature Maintenance Casters Cleaning and Disinfecting the Wet/Dry VacStorage 12 U.S. Gallons Wet/Dry Vac Model Number WD12500 Repair Parts12 U.S. Gallons Wet/Dry Vac Model Number WD12500 Emerson Tool Company Stock No. WD1250 Model No. WD12500 Serial NumberEmerson DivisionManual DEL Operador Sección IndicePalabras de señal de seguridad Guarde Este Manual Lista del contenido de la caja de cartón IntroducciónEnsamblaje de las ruedecillas/patas para ruedecilla Ensamblaje del filtro de repuesto Introduzca la manguera Ensamblaje de la aspiradora para mojado/secoAlmacenamiento del cordón Funcionamiento Para guardar los accesoriosVaciado del tambor Funcionamiento continuaciónDispositivo de soplado Mantenimiento del cordónTransporte de la aspiradora para mojado/seco Tubo de extensiónMantenimiento Ruedecillas Limpieza y desinfección de La aspiradora para mojado/secoAlmacenamiento De un cuadrado también esté marcado en los aparatos Piezas de repuestoSP6663 12 GALLON.qxd 3/16/07 857 AM Qué está cubierto Qué haremos para corregir los problemasCuánto dura la cobertura Cómo puede obtener servicio

WD1250 specifications

The RIDGID WD1250 is a high-performance wet/dry vacuum designed for a wide range of demanding cleaning tasks, making it an ideal choice for both professional contractors and DIY enthusiasts. With its powerful motor and robust construction, the WD1250 effectively handles various debris types, including water, dust, and larger particles, ensuring that you can tackle any mess with confidence.

One of the standout features of the RIDGID WD1250 is its impressive 12-gallon capacity. This large tank allows users to clean larger areas without the need for frequent emptying, enhancing productivity and convenience. The vacuum is equipped with an efficient 5.0 peak horsepower motor, delivering strong suction power that is capable of picking up heavy debris and liquids with ease. This powerhouse of a vacuum is designed to handle jobs in garages, workshops, and construction sites, ensuring that no mess is too big or challenging.

Additionally, the WD1250 features a unique and innovative cartridge filter, which can capture fine dust particles while still allowing for easy cleaning and maintenance. The filter is designed to be durable and long-lasting, making it a reliable choice for any cleaning task. Users can switch between dry and wet applications effortlessly, thanks to the vacuum's fine filtration system that can handle both types of materials without the need to change filters.

Portability is another essential aspect of the WD1250. It comes equipped with a sturdy handle and durable wheels, making it easy to move around your workspace or home. This vacuum also includes a variety of accessories, such as a 7-foot locking hose, extension wands, and a crevice tool, ensuring that you have everything you need to tackle various tasks.

The integrated storage for attachments keeps everything organized and within reach, minimizing downtime during cleaning sessions. Plus, the on-board accessory storage encourages a clutter-free environment, ensuring that you have the right tools whenever you need them.

In terms of design, the RIDGID WD1250 boasts a sleek, durable exterior that not only looks good but also withstands the rigors of intensive use. The puncture-resistant collection tank ensures long-lasting performance, making it a reliable workhorse for any job.

In summary, the RIDGID WD1250 is a versatile, powerful wet/dry vacuum that combines innovative technology, ample capacity, and user-friendly features. Whether you are cleaning up spills, dust, or debris, this vacuum is engineered to deliver exceptional performance, making it an indispensable tool for any cleaning arsenal.
Top Page Image Contents