OPERATING INSTRUCTIONS - Using Your Ultrasonic Humidifier and Night Lamp
5.Do not use bleach or any abrasive chemicals to clean Humio.
6.Fill the Water Tank partially with a sanitizing solution by adding half a teaspoon of 3% hydrogen peroxide per half gallon of water.
7.Assemble the machine and let the solution soak for 20 minutes.
8.Periodically lift the entire machine with one hand on the motor base and the other hand on the neck handle firmly pressed together and gently swish the water around by rotating the unit counter- clockwise.
9.After 20 minutes, empty the sanitizing solution from the Water Tank and Water Reservoir.
10.Rinse all parts thoroughly to remove all sanitizing solution prior to further use.
11.Remove any crusty mineral deposits, also known as scale build up, by scrubbing with a solution of half water and half vinegar using a soft brush.
12.Rinse all parts thoroughly to remove all water and vinegar solution prior to further use.
13.Wipe all parts dry and let stand for five minutes prior to use.
Please note, in order to remove the Rotating Mist Nozzle, you must remove the Neck Handle from the Water Tank and use a screwdriver to remove the attached screw for thorough cleaning.
Storage Procedure:
1.Follow all the steps found in the weekly maintenance portion of the proper care, cleaning and maintenance section.
2.Make sure the unit is free of water and completely dry before repackaging.
3.Repackage all Humio in the same color box provided when you first purchased the unit. If you do not have the color box, wrap Humio in a clear plastic bag and store in a clean cool dry place at room temperature and out of reach from children.
4.Follow all the steps found in the weekly maintenance portion of the proper care, cleaning and maintenance section after long periods of storage, prior to use.
9