Tribest HU1020 owner manual Important Safety Instructions

Page 4

Important Safety Instructions

Do not place Humio directly on wood furniture or other surfaces which can be damaged by water. Place Humio on a waterproof surface.

Do not place Humio in direct sunlight, high-temperature areas, near computers or sensitive electronic equipment.

Do not operate outdoors. Humio is intended for indoor use only.

Do not remove the water tank at any time during operation. Unit must be properly shut off when not in use.

Please contact the manufacturer for all service and repairs. Attempting to repair the unit yourself will void the warranty.

Do not use a sharp object to clean any part of Humio.

Not for use with scented oils or fragrances.

Do not use bleach to clean.

Never fill the water tank with hot or warm water.

Keep Humio a safe distance away from you during overnight operation, especially when you are sleeping.

Humio is not intended to replace, treat, or cure any symptoms related to dry or heated air. Always consult with your physician if you are experiencing respiratory problems.

Do not get water into the vent located in the interior of the base. If accidental tipping occurs and water gets into an area other than the reservoir, the unit may not turn on. Please unplug the machine and let dry for at least 24 hours before plugging it back in.

**WARNING! Do NOT pour water directly into the base of the unit. By doing so, water may enter the air vent causing the unit to malfunction, damaging the PCB circuit board, and voiding your warranty.

3

Image 4
Contents Ultrasonic Cool Mist Humidifier Night Lamp Table of Contents Important Safety Instructions Important Safety Instructions Product Diagram Features Ultrasonic Cool Mist HumidifierReplace the Water Tank Cap by firmly turning clockwise Page Proper Care, Cleaning and Maintenance Page Troubleshooting Warranty Please Read CarefullyWarranty Registration Form Humio RegistrationProduct Standard Tribest Corporation