Set Up and Operation | Tornado 98190 specs

Set Up and Operation:

Your Marathon 2000 is shipped complete and ready for carpet cleaning. This style of machine is sometimes referred to as a self-contained extractor, since everything is included in the body of the Marathon 2000 extractor.

1.Install recovery tank cover to the top of the tank and connect the suction hose to the cover.

2.Important! – Prior to first use: The unit has been tested with window washer fluid at the factory, and a small amount of this fluid may remain in the system as a precaution against freezing. Prior to first use, flush the tank and pump system with a half-gallon of plain water.

3.Open filler door at the front of the tank and fill with hot water. Add liquid cleaning solution to proper dilution ratio.

4.Use separate buckets to fill and empty extractor. Avoid using undissolved soap or chemicals that could potentially plug the spray jets.

5.Attach a 12-gage extension cord to the pig tail plug on the machine.

WARNING:

To avoid serious injury: Plug into a grounded (earth) outlet only. Do not use an adapter or remove ground pin on plug. Do not use a damaged cord.

6.Activate the main power switch. The LED light will be lit.

7.Lower the manual release lever and allow the brush assembly to rest on the floor. The height of the suction nozzle may need to be adjusted using the turn knob.

8.Activate the vacuum motor switch.

9.Activate the brush motor switch.

10.Activate the spray bar switch. Remember to turn off this switch about 6” from the end of each cleaning pass.

11.Squeeze the trip lever on the main handle to move the extractor forward. The machine has a powered transaxle, so forward movement will be quick and easy. Turn the variable speed control clockwise to increase the forward speed. Note that the pump or brush will not operate until the machine is in motion and the spray and brush switches are turned on.

12.As you are cleaning, monitor the water level in the recovery tank cover. An overflow of water in the recovery tank can damage the vacuum motor. Always be aware of this water level.

13.The recovery tank can be drained by removing the drain hose from its support clip and removing the drain plug. The standpipe in the recovery tank is equipped with a metal screen cap. This cap is accessible by removing the clear dome on top of the unit. It is recommended that this cap be cleaned after every machine use.

14.The solution tank has a clear see through drain hose, which tells the operator the tank level. The water in the solution tank can be drained using this hose.

98190 specifications

Tornado 98190 is a groundbreaking military technology that has revolutionized the way tactical operations are conducted. This innovative system is primarily designed for reconnaissance, surveillance, and target acquisition, offering military forces a distinct advantage in various combat scenarios.

One of its main features is the integration of advanced sensors, which are capable of capturing high-resolution imagery and data in real-time. This feature enables operators to monitor enemy movements, identify potential threats, and gather intelligence without exposing themselves to danger. The system is also equipped with thermal imaging capabilities, making it effective during nighttime operations or in low-visibility conditions.

The Tornado 98190 employs cutting-edge communication technologies, allowing seamless data transfer between units. This ensures that all forces involved in an operation have access to the same critical information, facilitating coordinated attacks and strategic planning. Furthermore, the integration of artificial intelligence enhances its decision-making processes, allowing for quicker response times and improved operational efficiency.

Another notable characteristic of the Tornado 98190 is its mobility. It is designed to be deployed quickly and efficiently in a variety of environments, from urban settings to rugged terrain. The system can be transported via air, land, or sea, making it versatile and adaptable to any mission. This mobility is complemented by its ability to operate in diverse climatic conditions, ensuring its functionality in extreme temperatures or inclement weather.

Safety features are also a top priority in the design of the Tornado 98190. Built with redundant systems and robust materials, it is engineered to withstand external threats and minimize the risk to personnel. This reliability is crucial, as the system often operates in hostile environments where safety is paramount.

In conclusion, Tornado 98190 represents a significant advancement in military technology. Its combination of advanced sensors, AI capabilities, real-time communication, and mobility makes it an invaluable asset for modern military operations. As military strategies continue to evolve, systems like the Tornado 98190 will play a crucial role in ensuring effective responses to complex threats on the battlefield.