11.5 DSC/RADIO SETUP MODE
The RAM+ can access the DSC / RADIO setup menu (refer to section “9 DIGI- TAL SELECTIVE CALLING” and section “10 RADIO SETUP MODE” for de- tails). The LAMP, CONTRAST, and KEY BEEP menu item accessed from the RAM+ only controls the RAM+’s display and speaker.
DSC/RADIO Setup mode from the RAM+:
1.Press and hold down the [CALL(ENT)] key until “RADIO SETUP” menu appears.
2.Press the [S]/[T] key to select “RADIO SETUP” or “DSC SETUP” menu.
3.Press the [CALL(ENT)] key, then select the menu item you wish to work on by pressing the [S]/[T] key.
4.Press the [CALL(ENT)] key.
5.Press the [S]/[T] key to change the value or condition for the menu item, then press the [CALL(ENT)] key to save the new setting.
6.Press the [S]/[T] key to select “EXIT,” then press the [CALL(ENT)] key to
return to the normal operation. |
|
RADIO | DSC |
NOTE
When setup menu is selected, the GX3000E will be temporarily disabled until the RAM+ mic, exits from the setup mode.
Page 76 |
| GX3000E |
|
