12 VH-310 Handset Operation | Standard Horizon Matrix GX3000E

12 VH-310 HANDSET OPERATION

When the VH-310HANDSET is connected to the GX3000E, most VHF, DSC, and setup menus can be remotely operated. The VH-310HANDSET is supplied with 7 m of routing cable and can be extended up to 21 m using three 7 m extension cables model CT-100. The intercom operation can be used between the VH-310HANDSET or the GX3000E.

12.1 VH-310 HANDSET CONTROLS

PWR key

Press and hold down this key to turn to

the transceiver and VH-310HANDSET on and off.

PTT (Push-To-Talk) Switch Activates transmission.

[H/L] key Toggles between high and low power. When the [H/L] key is pressed while the transceiver is on channel 13 or 67, the

power will temporarily switch from “LO” to “HI” power until the PTT is released. The [H/L] key does not function on transmit in-

hibited and low power only channels.

[DISTRESS] key

Used to send a DSC Distress Call. To send the distress call refer to section “9.3.1. Transmit- ting a DSC Distress Alert.”

RADIO CONTROL KEYS [VOL] key

Activates the volume adjusting mode.

Press this key to activate the volume adjusting mode.

Press the [S] or [T] to adjust the volume.

NOTE

When the VH-310handset is removed from the cradle the speaker audio will be automatically reduced so not to damage your hearing. When the VH-310is in the cradle the speaker audio will increase so communications can be heard.

Page 78		GX3000E

Image 78

Standard Horizon Matrix GX3000E owner manual 12 VH-310 Handset Operation, 12.1 VH-310 Handset Controls, PWR key

Contents

Matrix GX3000E Watt VHF/FM ITU Class D DSC Marine Transceiver Table of Contents Appendix General Information Packing ListOptions Installation Note Getting Started About VHF RadioSelecting AN Antenna Coaxial Cable Mounting the Radio InstallationLocation Desktop Mounting Overhead Mounting MMB-84 Flush Mount Installation Optional MMB-84 Flush Mount Bracket Electrical Connections Reverse polarity connections will damage the radio Accessory Cable Wire Color/Description Connection Examples Checking GPS Connections Changing the GPS Time Changing the Time Location Local Changing COG to True or Magnetic Receiver Audio Tone Control GX3000E RAM+ mic procedure Remote Mic or External Speaker Selection Controls and Indicators Basic Operation Power Switch / Volume Control VOL/PWR WX Key PA/FOG Key Distress Key Accessory Connection Cable PTT Push-To-Talk Switch 16/9 Key Memo Reception Transmit Time OUT Timer TOTBasic Operation Transmission Noaa Weather Channels INTERNATIONAL, USA, and Canada ModeSIMPLEX/DUPLEX Channel USE Noaa Weather Alert Noaa Weather Alert Testing Emergency Channel 16 USE Calling Another Vessel Channel 16 or Making Telephone Calls Operating on Channels 13 Dual Watch to Priority Channel Scanning Selecting the Scan TypeMemory Scanning M-SCAN Priority Scanning P-SCAN Operating the PA Hail mode Operating the FOG Horn mode13 PA/FOG Operation Navigation Indication Intercom Operation Communication Calling Voice Scrambler Digital Selective Calling Maritime Mobile Service Identity MmsiWhat is an MMSI? General Programming the Mmsi DSC Distress Alert Transmitting a DSC Distress Alert Transmitting a DSC Distress Alert with Nature of Distress Receiving a DSC Distress Alert Distress Relay ALL Ships Call Transmitting an All Ships Call Receiving an All Ships Call Setting up the Individual / Position Call Directory Individual Call Setting up Individual Reply Setting up the Individual/Group Call Ringer Transmitting an Individual Call Pre-Programmable Calling Manual Calling Call Waiting Directory Receiving an Individual Call To Delete the Received Log from the DSC Log Directory Setting up a Group Call Group Call Transmitting a Group Call Manual Calling Receiving a Group Call Setting up Position Reply Position Request Transmitting a Position Request to Another Vessel Pre-Programmable Request Manual Request Receiving a Position Request Automatically reply Setting up a Position Send Ringer Position SendTransmitting a DSC Position Send Call Receiving a DSC Position Send Call DSC Transmission Test Manual Inputting GPS Location LAT/LON Radio Setup Lamp AdjustingLCD Contrast Time Offset Time Location True Magnetic Change NAV display Priority Channel SET Scan Type Scan Resume Time KEY Beep ON/OFF WX Alert Channel Name Change Naming the Radio or Second Station MIC or Handset Flybridge FOG Alert Tone Frequency Squelch Control SQL Activates the squelch adjusting mode Enhanced RAM+ MIC Operation11.1 RAM+ MIC Controls Power Switch PWR PTT Push-To-TalkSWITCH Activates transmission KEY Distress KEY 11.2 PA/FOG Operation Operating the PA / HailerOperating the FOG Horn Press and hold the Dwic key while in Radio mode Manual Inputting of the GPS Location LAT/LON 11.5 DSC/RADIO Setup Mode Changing GPS Information to Vessel Position or COG 12.1 VH-310 Handset Controls PTT Push-To-Talk Switch Activates transmission12 VH-310 Handset Operation PWR key Secondary use Keypad 1DIM key Secondary use 12.2 PA/FOG Operation Intercom Operation Manual Inputting of the GPS Location LAT/LON 12.5 DSC/RADIO Setup Mode Radio SETUP-menu DSC SETUP-menu External Speaker AF Selection FOG Horn Timing Chart Type Pattern Usage Maintenance Replacement PartsFactory Service Troubleshooting Chart Symptom Probable Cause Remedy Channel Assignments VHF Marine Channel Chart Channel USE VHF Marine Channel Chart 157.075 Government Only Environmental protection operations Specifications General Declaration of Conformity Vertex Standard