
9.9 POSITION SEND
The feature is similar to Position Request, however instead of requesting a position of another vessel this function allows you to send your position to an- other vessel. In order to send your position you need to have a GPS receiver connected or to have manually input your position. See “9.11 Manually Input- ting Your GPS Location.”
9.9.1 Setting up a Position Send Ringer
The GX3000E has the capability to turn off the Position Send ringer.
1. Press and hold down the [CALL(MENU)] key until “Radio Setup” menu appears.
2. Turn the CHANNEL selector knob to select “DSC Setup” menu.
3. Press the [ENT] key, then select “DSC Beep” with the CHANNEL selector knob.
4. Press the [ENT] key. 5. Turn the CHANNEL selector knob to select “POS
Send.” 6. Turn the CHANNEL selector knob to select “Off.” 7. Press the [ENT] key to store the selected setting.
8. To exit this menu and return to radio operation mode press the [16/9] key.
If you wish to return to enabling the ringer tone, just re- peat the above procedure, turning the CHANNEL selec- tor knob to select “On” in step “6” above.
9.9.2Transmitting a DSC Position Send Call
Pre-Programmable Calling
1. Press the [CALL(MENU)] key.
The “DSC Operation” menu will appear in the display.
2. Turn the CHANNEL selector knob to select the “POS Send.”
3. Press the [ENT] key to select the Individual directory.
4. Turn the CHANNEL selector knob to select a name in the directory, then press the [ENT] key.
5. Press the [ENT] key to send your position to the se- lected vessel.
GX3000E |
| Page 57 |
|