Manuals / Standard Horizon / Marine Equipment / Marine Radio

Standard Horizon Matrix GX3000E Transmitting an Individual Call, Pre-Programmable Calling

Models: Matrix GX3000E

1 96

Download 96 pages 43.21 Kb

Page 45

9.5.4 Transmitting an Individual Call

This feature allows the user to contact another vessel with a DSC radio. This feature is similar to calling a vessel on CH16 and requesting to go to another channel.

Pre-Programmable Calling

1. Press the [CALL(MENU)] key. The “DSC Operation” menu will appear.

2. Turn the CHANNEL selector knob to select “Indi- vidual.” (To cancel, select “Exit” with the CHANNEL selector knob or press the [16/9] key.)

3. Press the [ENT] key. The transceiver will beep, and the “Individual directory” will appear.

4. Turn the CHANNEL selector knob to select the “Indi- vidual” you want to contact.

5. Press the [ENT] key, then turn the CHANNEL selec- tor knob to select the operating channel you want to communicate on and press the [ENT] key.

6. Press the [ENT] key again to transmit the individual DSC signal.

7. After INDIVIDUAL CALL is transmitted, the trans- ceiver will wait 8 seconds for the acknowledgment. If the reply signal is not received, the transceiver will transmit again.

8. After the second INDIVIDUAL CALL is transmitted, if the reply signal is not received, the display will be as shown in the illustration on the right. To send the call again, press the [ENT] key.

9. When an individual call acknowledgment is received, the established channel is automatically changed to the channel which is selected on step 5 above and a ringing tone sounds.

10. Press any key to listen to the channel to make sure it is not busy, then key the microphone and call the other vessel you desire to communicate with.

GX3000E		Page 45

Image 45

Standard Horizon Matrix GX3000E owner manual Transmitting an Individual Call, Pre-Programmable Calling

Contents

Watt VHF/FM ITU Class D DSC Marine Transceiver Matrix GX3000ETable of Contents Appendix General Information Packing ListOptions Installation Note Getting Started About VHF RadioSelecting AN Antenna Coaxial Cable Location InstallationMounting the Radio Desktop Mounting Overhead MountingOptional MMB-84 Flush Mount Bracket MMB-84 Flush Mount InstallationReverse polarity connections will damage the radio Electrical ConnectionsWire Color/Description Connection Examples Accessory CableChanging the GPS Time Checking GPS ConnectionsLocal Changing the Time LocationChanging COG to True or Magnetic Receiver Audio Tone Control GX3000E Remote Mic or External Speaker Selection RAM+ mic procedureBasic Operation Power Switch / Volume Control VOL/PWR Controls and IndicatorsPA/FOG Key WX KeyDistress Key Accessory Connection Cable 16/9 Key PTT Push-To-Talk SwitchMemo Basic Operation Transmit Time OUT Timer TOTReception TransmissionSIMPLEX/DUPLEX Channel USE INTERNATIONAL, USA, and Canada ModeNoaa Weather Channels Noaa Weather AlertEmergency Channel 16 USE Noaa Weather Alert TestingMaking Telephone Calls Calling Another Vessel Channel 16 orDual Watch to Priority Channel Operating on Channels 13Scanning Selecting the Scan TypeMemory Scanning M-SCAN Priority Scanning P-SCAN Operating the PA Hail mode Operating the FOG Horn mode13 PA/FOG Operation Intercom Operation Navigation IndicationCalling CommunicationVoice Scrambler What is an MMSI? Maritime Mobile Service Identity MmsiDigital Selective Calling GeneralProgramming the Mmsi Transmitting a DSC Distress Alert DSC Distress AlertTransmitting a DSC Distress Alert with Nature of Distress Distress Relay Receiving a DSC Distress AlertTransmitting an All Ships Call ALL Ships CallReceiving an All Ships Call Individual Call Setting up the Individual / Position Call DirectorySetting up Individual Reply Setting up the Individual/Group Call Ringer Pre-Programmable Calling Transmitting an Individual CallManual Calling Receiving an Individual Call Call Waiting DirectoryTo Delete the Received Log from the DSC Log Directory Group Call Setting up a Group CallTransmitting a Group Call Manual Calling Receiving a Group Call Position Request Setting up Position ReplyPre-Programmable Request Transmitting a Position Request to Another VesselManual Request Automatically reply Receiving a Position RequestSetting up a Position Send Ringer Position SendTransmitting a DSC Position Send Call Receiving a DSC Position Send Call DSC Transmission Test Manual Inputting GPS Location LAT/LON Radio Setup Lamp AdjustingLCD Contrast Time Offset True Magnetic Change NAV display Time LocationScan Type Priority Channel SETKEY Beep ON/OFF Scan Resume TimeWX Alert Channel Name Change Flybridge Naming the Radio or Second Station MIC or HandsetFOG Alert Tone Frequency Squelch Control SQL Activates the squelch adjusting mode Enhanced RAM+ MIC Operation11.1 RAM+ MIC Controls PTT Push-To-TalkSWITCH Activates transmission KEY Power Switch PWRDistress KEY 11.2 PA/FOG Operation Operating the PA / HailerOperating the FOG Horn Press and hold the Dwic key while in Radio mode Manual Inputting of the GPS Location LAT/LON 11.5 DSC/RADIO Setup Mode Changing GPS Information to Vessel Position or COG 12 VH-310 Handset Operation PTT Push-To-Talk Switch Activates transmission12.1 VH-310 Handset Controls PWR keySecondary use Keypad 1DIM key Secondary use 12.2 PA/FOG Operation Intercom Operation Manual Inputting of the GPS Location LAT/LON Radio SETUP-menu DSC SETUP-menu 12.5 DSC/RADIO Setup ModeExternal Speaker AF Selection Type Pattern Usage FOG Horn Timing ChartMaintenance Replacement PartsFactory Service Symptom Probable Cause Remedy Troubleshooting ChartChannel Assignments VHF Marine Channel Chart Channel USE VHF Marine Channel Chart 157.075 Government Only Environmental protection operations General SpecificationsDeclaration of Conformity Vertex Standard