Manual Calling
1. Press the [CALL(MENU)] key. The “DSC Operation” menu will appear in the display.
2. Turn the CHANNEL selector knob to select the “POS Send.”
3. Press [ENT] key to show the Position Send directory. This directory uses the INDIVIDUAL Directory infor- mation.
4. Turn the CHANNEL selector knob to select “Manual,” then press the [ENT] key.
5. Enter the MMSI number (nine digits) which you want to contact, then press the [ENT] key.
6. Press the [ENT] key to send your position to the se- lected vessel.
9.9.3 Receiving a DSC Position Send Call
When another vessel transmits their location to the GX3000E, the following will happen:
1.A ringing sound will be produced when the call is received.
2.Press the [16/9] key to stop ringing
3.The position from the calling vessel will be shown on the display of the radio and also transferred to any Standard Horizon GPS Chart plotter if con- nected.
NOTE
When there is an unread DSC Position Send Call, the “DSC” icon will blink. You may review the unread DSC Position Send Call from the DSC Log, refer to section “9.6.2 Reviewing Received Calls Logged into the Call Waiting Directory.”
Page 58 |
| GX3000E |
|
