Standard Horizon Matrix GX3000E owner manual Manual Inputting of the GPS Location LAT/LON

11.4 MANUAL INPUTTING OF THE GPS LOCATION (LAT/LON)

You may send the Latitude/Longitude of your vessel manually from the RAM+ Mic even if the GX3000E is not connected the GPS receiver unit.

After the position is entered, transmitting a DSC Distress, Position Request, or Position Send will contain the manually entered position.

1. Press and hold down the [CALL(ENT)] key until “Radio Setup” menu appears.

2. Press the [T] key to select “DSC SETUP” menu. 3. Press the [CALL(ENT)] key, then select “POS INPUT” with

the [S]/[T] key. 4. Press the [CALL(ENT)] key then, enter the your local time

by the 24-hour system on the UTC time. Use the [CALL(ENT)] and [H/L] key to navigate to each column of the time, then use the [S]/[T] key to select the desired num-

bers in colum. Repeat for each colum, to completed the time. 5. Enter the Latitude/Longitude of your vessel location with the same procedure as description above.

6. Press and hold in the [ENT] key to store the data entered, then press the [16/9] key to exit this menu and return to radio operation mode.

GX3000E Page 75