Manuals / Standard Horizon / Marine Equipment / Marine Radio

Standard Horizon Matrix GX3000E owner manual Time Location, True Magnetic Change NAV display

Models: Matrix GX3000E

1 96

Download 96 pages 43.21 Kb

Page 63

10.4 TIME LOCATION

This selection selects the time display between local time and UTC (time GPS sends to radio). Time is displayed when GPS position (LAT/LON) is displayed by pressing and holding the [H/L(NAV)] key.

1. Press and hold down the [CALL(MENU)] key until “Radio Setup” menu appears.

2. Press the [ENT] key, then select “Time Disp.” in the “Radio Setup” menu with the CHANNEL selector knob.

3. Press the [ENT] key. 4. Turn the CHANNEL selector knob to select “UTC” or

“Local.”

5. Press the [ENT] key to store the selected setting. 6. To exit this menu and return to radio operation mode

press the [16/9] key.

In the local time mode, the display shows the time by the 12-hour system. Meanwhile, the display shows the time by the 24-hour system in the UTC mode.

(“UTC” mode)

(“LOCAL” mode)

10.5 TRUE MAGNETIC CHANGE (NAV display)

This selection allows customising the GPS COG (Course Over Ground) dis- played on the LCD to be in True or Magnetic.

1. Press and hold down the [CALL(MENU)] key until “Radio Setup” menu appears.

2. Press the [ENT] key, then select “Magnetic” in the “Radio Setup” menu with the CHANNEL selector knob.

3. Press the [ENT] key. 4. Turn the CHANNEL selector knob to select “On” (rep-

resenting “Magnetic”) or “Off” (representing “True”).

5. Press the [ENT] key to store the selected setting. 6. To exit this menu and return to radio operation mode

press the [16/9] key.

GX3000E		Page 63

Image 63

Standard Horizon Matrix GX3000E owner manual Time Location, True Magnetic Change NAV display

Contents

Watt VHF/FM ITU Class D DSC Marine Transceiver Matrix GX3000ETable of Contents Appendix General Information Packing ListOptions Installation Note Getting Started About VHF RadioSelecting AN Antenna Coaxial Cable Desktop Mounting Overhead Mounting InstallationLocation Mounting the RadioOptional MMB-84 Flush Mount Bracket MMB-84 Flush Mount InstallationReverse polarity connections will damage the radio Electrical ConnectionsWire Color/Description Connection Examples Accessory CableChanging the GPS Time Checking GPS ConnectionsLocal Changing the Time LocationChanging COG to True or Magnetic Receiver Audio Tone Control GX3000E Remote Mic or External Speaker Selection RAM+ mic procedureBasic Operation Power Switch / Volume Control VOL/PWR Controls and IndicatorsPA/FOG Key WX KeyDistress Key Accessory Connection Cable 16/9 Key PTT Push-To-Talk SwitchMemo Transmission Transmit Time OUT Timer TOTBasic Operation ReceptionNoaa Weather Alert INTERNATIONAL, USA, and Canada ModeSIMPLEX/DUPLEX Channel USE Noaa Weather ChannelsEmergency Channel 16 USE Noaa Weather Alert TestingMaking Telephone Calls Calling Another Vessel Channel 16 orDual Watch to Priority Channel Operating on Channels 13Scanning Selecting the Scan TypeMemory Scanning M-SCAN Priority Scanning P-SCAN Operating the PA Hail mode Operating the FOG Horn mode13 PA/FOG Operation Intercom Operation Navigation IndicationCalling CommunicationVoice Scrambler General Maritime Mobile Service Identity MmsiWhat is an MMSI? Digital Selective CallingProgramming the Mmsi Transmitting a DSC Distress Alert DSC Distress AlertTransmitting a DSC Distress Alert with Nature of Distress Distress Relay Receiving a DSC Distress AlertTransmitting an All Ships Call ALL Ships CallReceiving an All Ships Call Individual Call Setting up the Individual / Position Call DirectorySetting up Individual Reply Setting up the Individual/Group Call Ringer Pre-Programmable Calling Transmitting an Individual CallManual Calling Receiving an Individual Call Call Waiting DirectoryTo Delete the Received Log from the DSC Log Directory Group Call Setting up a Group CallTransmitting a Group Call Manual Calling Receiving a Group Call Position Request Setting up Position ReplyPre-Programmable Request Transmitting a Position Request to Another VesselManual Request Automatically reply Receiving a Position RequestSetting up a Position Send Ringer Position SendTransmitting a DSC Position Send Call Receiving a DSC Position Send Call DSC Transmission Test Manual Inputting GPS Location LAT/LON Radio Setup Lamp AdjustingLCD Contrast Time Offset True Magnetic Change NAV display Time LocationScan Type Priority Channel SETKEY Beep ON/OFF Scan Resume TimeWX Alert Channel Name Change Flybridge Naming the Radio or Second Station MIC or HandsetFOG Alert Tone Frequency Squelch Control SQL Activates the squelch adjusting mode Enhanced RAM+ MIC Operation11.1 RAM+ MIC Controls PTT Push-To-TalkSWITCH Activates transmission KEY Power Switch PWRDistress KEY 11.2 PA/FOG Operation Operating the PA / HailerOperating the FOG Horn Press and hold the Dwic key while in Radio mode Manual Inputting of the GPS Location LAT/LON 11.5 DSC/RADIO Setup Mode Changing GPS Information to Vessel Position or COG PWR key PTT Push-To-Talk Switch Activates transmission12 VH-310 Handset Operation 12.1 VH-310 Handset ControlsSecondary use Keypad 1DIM key Secondary use 12.2 PA/FOG Operation Intercom Operation Manual Inputting of the GPS Location LAT/LON Radio SETUP-menu DSC SETUP-menu 12.5 DSC/RADIO Setup ModeExternal Speaker AF Selection Type Pattern Usage FOG Horn Timing ChartMaintenance Replacement PartsFactory Service Symptom Probable Cause Remedy Troubleshooting ChartChannel Assignments VHF Marine Channel Chart Channel USE VHF Marine Channel Chart 157.075 Government Only Environmental protection operations General SpecificationsDeclaration of Conformity Vertex Standard