10.8 SCAN RESUME TIME
This selection is used to select the time the GX3000E waits after a transmis- sion ends before starting scanning.
1. Press and hold down the [CALL(MENU)] key until “Radio Setup” menu appears.
2. Press the [ENT] key, then select “SCAN Resume” in the “Radio Setup” menu with the CHANNEL selec- tor knob.
3. Press the [ENT] key. 4. Turn the CHANNEL selector knob to select the de-
sired resume time. The resume time can be set to “1sec,” “2sec,” “3sec,” or “Off.” In the “Off” selec- tion, the scanner will resume after the other station stops transmitting (carrier drops).
5.Press the [ENT] key to store the selected setting.
6.To exit this menu and return to radio operation mode press the [16/9] key.
10.9 KEY BEEP (ON/OFF)
This selection allows the key beep to be turned off.
1. Press and hold down the [CALL(MENU)] key until “Radio Setup” menu appears.
2. Press the [ENT] key, then select “Key Beep” in the “Radio Setup” menu with the CHANNEL selector knob.
3. Press the [ENT] key.
4. Turn the CHANNEL selector knob to select “On” or “Off.”
5. Press the [ENT] key to set the key beep condition. 6. To exit this menu and return to radio operation mode
press the [16/9] key.
NOTE
Emergency alarm and beeps for DSC operation cannot be turned OFF.
GX3000E |
| Page 65 |
|
