11.2 PA/FOG Operation | Standard Horizon Matrix GX3000E specs

11.2 PA/FOG OPERATION

The RAM+ is capable of controlling the 30W Public address, 4 fog horns, bells and whistles.

11.2.1 Operating the PA / Hailer

1. Press and hold the [NAV] key then select “PUBLIC ADRESS” with the [S] or [T] key.

2. Press the [CALL(ENT)] key.

3. Press the PTT switch and speak into the microphone.

4. To turn up the PA Volume, press the PTT switch and press the [S] or [T] keys to adjust the Audio output level. The level can be set from 0 to 30W.

5. To adjust the listen back volume, (while in listenback mode) press the [VOL] Key, then press the [S] or [T] key to the desired listen back volume.

To exit from the PA / Hailer mode, press and hold down the [NAV] key again.

11.2.2 Operating the FOG Horn

The GX3000E is capable of sending Underway, Stop, Sail, Tow, Horn, Siren, Aground and Anchor signals.

1. Press and hold the [NAV] key then select “FOG” with the [S]

or [T] key. 2. Press the [CALL(ENT)] key. 3. Select the one of the eight functions described above with

the [S] or [T] key and press the [CALL(ENT)] key. 4. On the “Horn” and “Siren” modes, press the PTT switch to

activate the tone through the HAIL/PA speaker. Press the [S] or [T] keys to adjust the Audio output level. The level can be set from 0 to 30W.

5. To adjust the listen back volume, (while in listenback mode) press the [VOL] Key, then press the [S] or [T] key to the desired listen back volume.

To exit from the FOG HORN mode, press and hold down the [NAV] key again.

GX3000E		Page 73

Image 73

Standard Horizon Matrix GX3000E owner manual 11.2 PA/FOG Operation, Operating the PA / Hailer, Operating the FOG Horn

Contents

Watt VHF/FM ITU Class D DSC Marine Transceiver Matrix GX3000E Table of Contents Appendix Packing List General InformationOptions Installation Note About VHF Radio Getting StartedSelecting AN Antenna Coaxial Cable Location InstallationMounting the Radio Desktop Mounting Overhead Mounting Optional MMB-84 Flush Mount Bracket MMB-84 Flush Mount Installation Reverse polarity connections will damage the radio Electrical Connections Wire Color/Description Connection Examples Accessory Cable Changing the GPS Time Checking GPS Connections Local Changing the Time Location Changing COG to True or Magnetic Receiver Audio Tone Control GX3000E Remote Mic or External Speaker Selection RAM+ mic procedure Basic Operation Power Switch / Volume Control VOL/PWR Controls and Indicators PA/FOG Key WX Key Distress Key Accessory Connection Cable 16/9 Key PTT Push-To-Talk Switch Memo Basic Operation Transmit Time OUT Timer TOTReception Transmission SIMPLEX/DUPLEX Channel USE INTERNATIONAL, USA, and Canada ModeNoaa Weather Channels Noaa Weather Alert Emergency Channel 16 USE Noaa Weather Alert Testing Making Telephone Calls Calling Another Vessel Channel 16 or Dual Watch to Priority Channel Operating on Channels 13 Selecting the Scan Type ScanningMemory Scanning M-SCAN Priority Scanning P-SCAN Operating the FOG Horn mode Operating the PA Hail mode13 PA/FOG Operation Intercom Operation Navigation Indication Calling Communication Voice Scrambler What is an MMSI? Maritime Mobile Service Identity MmsiDigital Selective Calling General Programming the Mmsi Transmitting a DSC Distress Alert DSC Distress Alert Transmitting a DSC Distress Alert with Nature of Distress Distress Relay Receiving a DSC Distress Alert Transmitting an All Ships Call ALL Ships Call Receiving an All Ships Call Individual Call Setting up the Individual / Position Call Directory Setting up Individual Reply Setting up the Individual/Group Call Ringer Pre-Programmable Calling Transmitting an Individual Call Manual Calling Receiving an Individual Call Call Waiting Directory To Delete the Received Log from the DSC Log Directory Group Call Setting up a Group Call Transmitting a Group Call Manual Calling Receiving a Group Call Position Request Setting up Position Reply Pre-Programmable Request Transmitting a Position Request to Another Vessel Manual Request Automatically reply Receiving a Position Request Position Send Setting up a Position Send RingerTransmitting a DSC Position Send Call Receiving a DSC Position Send Call DSC Transmission Test Manual Inputting GPS Location LAT/LON Lamp Adjusting Radio SetupLCD Contrast Time Offset True Magnetic Change NAV display Time Location Scan Type Priority Channel SET KEY Beep ON/OFF Scan Resume Time WX Alert Channel Name Change Flybridge Naming the Radio or Second Station MIC or Handset FOG Alert Tone Frequency Enhanced RAM+ MIC Operation Squelch Control SQL Activates the squelch adjusting mode11.1 RAM+ MIC Controls PTT Push-To-TalkSWITCH Activates transmission KEY Power Switch PWR Distress KEY Operating the PA / Hailer 11.2 PA/FOG OperationOperating the FOG Horn Press and hold the Dwic key while in Radio mode Manual Inputting of the GPS Location LAT/LON 11.5 DSC/RADIO Setup Mode Changing GPS Information to Vessel Position or COG 12 VH-310 Handset Operation PTT Push-To-Talk Switch Activates transmission12.1 VH-310 Handset Controls PWR key Secondary use Keypad 1DIM key Secondary use 12.2 PA/FOG Operation Intercom Operation Manual Inputting of the GPS Location LAT/LON Radio SETUP-menu DSC SETUP-menu 12.5 DSC/RADIO Setup Mode External Speaker AF Selection Type Pattern Usage FOG Horn Timing Chart Replacement Parts MaintenanceFactory Service Symptom Probable Cause Remedy Troubleshooting Chart Channel Assignments VHF Marine Channel Chart Channel USE VHF Marine Channel Chart 157.075 Government Only Environmental protection operations General Specifications Declaration of Conformity Vertex Standard