NOTE
If the GX3000E does not receive position data from the polled vessel, the LCD will show “NO POSITION DATA.”
Manual Request
You may enter an MMSI number manually to contact without the Setting up the Individual / Position Call Directory.
1. Press the [CALL(MENU)] key. The “DSC Operation” menu will appear in the display.
2. Turn the CHANNEL selector knob to select “POS Re- quest.” 3. Press [ENT] key to show the Position request direc- tory. This directory uses the INDIVIDUAL Directory information.
4. Turn the CHANNEL selector knob to select “Manual,” then press the [ENT] key. 5. Turn the CHANNEL selector knob to scroll through
numbers,
one space to the right press the [ENT] key. Repeat this procedure until all nine space of the MMSI num- ber which you want to contact are entered.
6. If a mistake was made entering in the MMSI number repeat pressing the [H/L(NAV)] key until the wrong nunber is selected, then move the channel knob to correct the entry. 7. When finished entering the MMSI number, press and
hold the [ENT] key. 8. Press the [ENT] key to transmit the position request
DSC call. 9. When the GX3000E receives the position from the
polled vessel it is shown on the radio display and also transferred to the GPS Chart plotter.
10.If the GX3000E does not receive a reply, the display will be as shown in the illustration on the right. To send again, press the [ENT] key.
GX3000E |
| Page 55 |
|
