External Speaker AF Selection | Standard Horizon Matrix GX3000E

12.5.1Changing GPS Information to Vessel position or COG

Allows customising of the NAV data showing GPS Information. Factory default is “Your Vessel’s Current Position,” however, following the steps below the GPS Information can be changed to “Course Over Ground (COG).”

1. Press and hold down the [CALL(MENU)] key until “RADIO SETUP” menu appears.

2. Press the [ENT] key, then select “NAV DISPLAY” with the [S]/[T] key.

3. Press the [ENT] key.

4. Press the [T] or [S] key to select “Pos (Your Vessel’s Cur- rent Position)” or “Cru (Course Over Ground).”

5. Press the [ENT] key to store the data entered, then press the [16/9] key to exit this menu and return to radio operation mode.

12.5.2 External Speaker AF Selection

The AF SELECT menu allows you to set the audio output level of the VH-310’s External Speaker to “fixed” regardress of the VOL level setting of the VH-310, which is useful when using an amplified speaker, such as the Standard Horizon MLS-310.

1. Press and hold down the [CALL(MENU)] key until “Radio Setup” menu appears.

2. Press the [ENT] key, then select “AF SELECT” with the [S]/ [T] key.

3. Press the [ENT] key. 4. Press the [S] or [T] key to select “Pr” (External Speaker

Level is “Fixed”) or “Po” (External Speaker Level is “Adjust- able”).

5. Press the [ENT] key to store the data entered, then press the [16/9] key to exit this menu and return to radio operation mode.

Page 86		GX3000E

Image 86

Standard Horizon Matrix GX3000E Changing GPS Information to Vessel position or COG, External Speaker AF Selection

Contents

Matrix GX3000E Watt VHF/FM ITU Class D DSC Marine Transceiver Table of Contents Appendix Options General InformationPacking List Installation Note Selecting AN Antenna Getting StartedAbout VHF Radio Coaxial Cable Mounting the Radio InstallationLocation Desktop Mounting Overhead Mounting MMB-84 Flush Mount Installation Optional MMB-84 Flush Mount Bracket Electrical Connections Reverse polarity connections will damage the radio Accessory Cable Wire Color/Description Connection Examples Checking GPS Connections Changing the GPS Time Changing the Time Location Local Changing COG to True or Magnetic Receiver Audio Tone Control GX3000E RAM+ mic procedure Remote Mic or External Speaker Selection Controls and Indicators Basic Operation Power Switch / Volume Control VOL/PWR WX Key PA/FOG Key Distress Key Accessory Connection Cable PTT Push-To-Talk Switch 16/9 Key Memo Reception Transmit Time OUT Timer TOTBasic Operation Transmission Noaa Weather Channels INTERNATIONAL, USA, and Canada ModeSIMPLEX/DUPLEX Channel USE Noaa Weather Alert Noaa Weather Alert Testing Emergency Channel 16 USE Calling Another Vessel Channel 16 or Making Telephone Calls Operating on Channels 13 Dual Watch to Priority Channel Memory Scanning M-SCAN ScanningSelecting the Scan Type Priority Scanning P-SCAN 13 PA/FOG Operation Operating the PA Hail modeOperating the FOG Horn mode Navigation Indication Intercom Operation Communication Calling Voice Scrambler Digital Selective Calling Maritime Mobile Service Identity MmsiWhat is an MMSI? General Programming the Mmsi DSC Distress Alert Transmitting a DSC Distress Alert Transmitting a DSC Distress Alert with Nature of Distress Receiving a DSC Distress Alert Distress Relay ALL Ships Call Transmitting an All Ships Call Receiving an All Ships Call Setting up the Individual / Position Call Directory Individual Call Setting up Individual Reply Setting up the Individual/Group Call Ringer Transmitting an Individual Call Pre-Programmable Calling Manual Calling Call Waiting Directory Receiving an Individual Call To Delete the Received Log from the DSC Log Directory Setting up a Group Call Group Call Transmitting a Group Call Manual Calling Receiving a Group Call Setting up Position Reply Position Request Transmitting a Position Request to Another Vessel Pre-Programmable Request Manual Request Receiving a Position Request Automatically reply Transmitting a DSC Position Send Call Setting up a Position Send RingerPosition Send Receiving a DSC Position Send Call DSC Transmission Test Manual Inputting GPS Location LAT/LON LCD Contrast Radio SetupLamp Adjusting Time Offset Time Location True Magnetic Change NAV display Priority Channel SET Scan Type Scan Resume Time KEY Beep ON/OFF WX Alert Channel Name Change Naming the Radio or Second Station MIC or Handset Flybridge FOG Alert Tone Frequency 11.1 RAM+ MIC Controls Squelch Control SQL Activates the squelch adjusting modeEnhanced RAM+ MIC Operation Power Switch PWR PTT Push-To-TalkSWITCH Activates transmission KEY Distress KEY Operating the FOG Horn 11.2 PA/FOG OperationOperating the PA / Hailer Press and hold the Dwic key while in Radio mode Manual Inputting of the GPS Location LAT/LON 11.5 DSC/RADIO Setup Mode Changing GPS Information to Vessel Position or COG 12.1 VH-310 Handset Controls PTT Push-To-Talk Switch Activates transmission12 VH-310 Handset Operation PWR key Secondary use Keypad 1DIM key Secondary use 12.2 PA/FOG Operation Intercom Operation Manual Inputting of the GPS Location LAT/LON 12.5 DSC/RADIO Setup Mode Radio SETUP-menu DSC SETUP-menu External Speaker AF Selection FOG Horn Timing Chart Type Pattern Usage Factory Service MaintenanceReplacement Parts Troubleshooting Chart Symptom Probable Cause Remedy Channel Assignments VHF Marine Channel Chart Channel USE VHF Marine Channel Chart 157.075 Government Only Environmental protection operations Specifications General Declaration of Conformity Vertex Standard