Samsung series 510 user manual HL67A510J1F, Indicator Lights, + Vol, Remote Control Sensor

HL67A510J1F

➢The product color and shape may vary depending on the model.

1 SOURCE		5	(ENTER)
	Toggles between all the available input sources		Press to confirm a selection.
	(TV, AV1, AV2, S-Video1, S-Video2, Component1,	6 Indicator Lights
	Component2, PC, HDMI1, HDMI2 or HDMI3/DVI).
2 MENU			Blinks and turns off when the power is on and lights up
			in stand-by mode.
	Press to see an on-screen menu of your TV’s features.	7 POWER
3 + VOL –			Press to turn the TV on and off.
	Press to increase or decrease the volume.		Remote Control Sensor
	In the on-screen menu, use the + VOL – buttons as		Aim the remote control towards this spot on the TV.
	you would use the ◄ and ► buttons on the remote
	control.
4	CH
	Press to change channels.

In the on-screen menu, use the CH buttons as

you would use the ▲ and ▼ buttons on the remote control.

➢● When using the on-screen menu, the volume adjustment and channel selection buttons have the same function as the

▲/▼/◄/► buttons on the remote control.

●If the remote control no longer works or you have lost it, you can use the controls on the TV's panel.

Indicator Light Key

( : On, : Blinking, : Off)

STAND BY/TEMP TIMER LAMP Indication

Standby state.

The picture will automatically appear in about 15 seconds.

Auto Timer ON/OFF has been set and the set will automatically be turned on in about 15 seconds.

A cooling fan inside the set is not operating normally.

Lamp cover on the side of the set is not properly shut.

Check if the ventilation hole on the side of the set is blocked, because if the inner temperature is too high, the power will shut off.

Lamp may be defective. Please contact a certified technician.

➢● It takes about 30 seconds for the TV to warm up, so normal brightness may not appear immediately. ● The TV has a fan to keep the inside Lamp from overheating. You’ll occasionally hear it working.

English -