Samsung series 510 user manual Upgrading the Software, SW Upgrade

Upgrading the Software

Samsung may offer upgrades for your TV’s firmware in the future. Please contact the Samsung call center at 1-00-SAMSUNG to receive information about downloading upgrades and using a USB drive. Upgrades will be possible by connecting a USB drive to the USB port located on the side of your TV.

1Insert a USB drive containing the firmware upgrade into the USB Upgrade Port on the side of the TV.

Press the MENU button to display the menu.

Press the ▲ or ▼ button to select Setup, then press the ENTER button.

Press the ▲ or ▼ button to select SW Upgrade, then press the ENTER button.

4 The message Scanning for USB... It may take up to 0 seconds. is displayed.

If the firmware on the USB is properly recognized, the message Upgrade version xxxx to version xxxx? The system would be reset after upgrade. is displayed.

Press the ◄ or ► button to select OK, then press the ENTER button. The upgrade starts.

Please be careful not to disconnect the power or remove the USB drive while upgrades are being applied.

The TV will shut off and turn on automatically after completing the firmware upgrade.

➢When software is upgraded, video and audio settings you have made will return to their default (factory) settings. We recommend you write down your settings so that you can easily reset them after the upgrade.

USB Drive

	Melody	: Medium
Setup	Entertainment	: Off
	SW Upgrade	►

Software Upgrade

Scanning for USB.....

It may take up to 30 seconds.

Software Upgrade

Upgrade version XXXX to version XXXX ? The system would be reset after upgrade.

OKCancel

English -