Samsung series 510 user manual Connecting Cable TV, Cable without a Cable Box

Connecting Cable TV

To connect to a cable TV system, follow the instructions below.

Cable without a Cable Box

1Plug the incoming cable into the ANT IN terminal on the side of the TV.

➢Because this TV is cable-ready, you do not need a cable box to view unscrambled cable channels.

Connecting to a Cable Box that Descrambles All Channels

1Find the cable that is connected to the ANT OUT terminal on your cable box. ➢ This terminal might be labeled “ANT OUT”, “VHF OUT” or simply, “OUT”.

2Connect the other end of this cable to the ANT IN terminal on the side of the TV.

Connecting to a Cable Box that Descrambles Some Channels

ANT IN ANT OUT

If your cable box descrambles only some channels (such as premium channels), follow the instructions below. You will need a two-way splitter, an RF (A/B) switch, and four lengths of Antenna cable. (These items are available at most electronics stores.)

1Find and disconnect the cable that is connected to the ANT IN terminal on your cable box.

➢This terminal might be labeled “ANT IN”, “VHF IN” or simply, “IN”.

2Connect this cable to a two-way splitter.

3Connect an Antenna cable between an OUTPUT terminal on the splitter and the IN terminal on the cable box.

4Connect an Antenna cable between the ANT

OUT terminal on the cable box and the B–IN terminal on the RF(A/B) switch.

5Connect another cable between the other OUT terminal on the splitter and the A–IN terminal on the RF (A/B) switch.

6Connect the last Antenna cable between the OUT terminal on the RF (A/B) switch and the ANT IN terminal on the side of the TV.

ANT IN

	Incoming
	cable	Splitter
Incoming
cable	Splitter
			Cable Box
Incoming
cable	Splitter		RF (A/B)
	Cable Box		Switch
Incoming
cable	Splitter
			RF (A/B)
		Cable Box	Switch
			TV Side
Incoming
cable	Splitter	RF (A/B)
	Cable Box
		Switch

After you have made this connection, set the A/B switch to the “A” position for normal viewing. Set the A/B switch to the “B” position to view scrambled channels. (When you set the A/B switch to “B”, you will need to tune your TV to the cable box’s output channel, which is usually channel 3 or 4.)

English - 11