Samsung series 510 user manual Setting Up Anynet+, Scanning and Switching between Anynet+ Devices

Setting Up Anynet+

The following settings help set the Anynet+ functions.

To use the Anynet+ Function, Anynet+ (HDMI-CEC) must be set to On

1Press the MENU button. Press the ▲ or ▼ button to select Application, then press the ENTER button.

2Press the ▲ or ▼ button to select Anynet+ (HDMI-CEC), then press the ENTER button.

3Press the ▲ or ▼ button to select On, then press the ENTER button.

➢The Anynet+ (HDMI-CEC)function is enabled.

➢If you select Off, Anynet+ (HDMI-CEC)is disabled.

➢When the Anynet+ (HDMI-CEC)function is disabled, all the Anynet+ related operations are deactivated.

Setting an Anynet+ Device to turn Off Automatically when the TV is Turned Off

2Press the ▲ or ▼ button to select Auto Turn Off, then press the ENTER button.

3Press the ▲ or ▼ button to select Yes, then press the ENTER button.

➢The Auto Turn Off function is enabled.

➢If you select No, the Auto Turn Off function is canceled.

Press the EXIT button to exit.

Application Anynet+ (HDMI-CEC)

Anynet+ (HDMI-CEC)

Anynet+ (HDMI-CEC)	: Off
Auto Turn Off	: On
Move	Enter
Anynet+ (HDMI-CEC)
Anynet+ (HDMI-CEC)	: No
Auto Turn Off	: Yes
Move	Enter

►

Return

Return

➢The active source on the TV remote must be set to TV to use the Anynet+ function.

➢If you set Auto Turn Off to Yes, connected external devices are also turned off when the TV is turned off. If an external device is still recording, it may or may not turn off.

Scanning and Switching between Anynet+ Devices

1Press the TOOLS button.

➢Anynet+ devices connected to the TV are listed.

➢If you cannot find a device you want, press the red button to scan for devices.

2Press the ▲ or ▼ button to select a particular device and press the ENTER button. It is switched to the selected device.

➢Only when you set Anynet+ (HDMI-CEC)to On in the Application menu, the Device List menu appears.

3If you cannot find a device you want, press the ▲ or ▼ button to select

Searching Connections, then press the ENTER button.

The message Configuring Anynet+ connection... is displayed.

When searching devices complete, the connected devices are listed in the Anynet+ menu.

		TOOLS
	Device List
Picture Mode		:	Standard
Sound Mode		:	Custom
Sleep Timer		:	Off

Add to Favorite

Switch to Cable

Move Enter Exit

➢Switchingoperation.to the selected devices may take up to 2 minutes. You cannot cancel the operation during the switching

➢The time required to scan for devices is determined by the number of connected devices.

➢When the device scan is complete, the number of devices found are not displayed.

➢Although the TV automatically scans devices when it is turned on using the POWER button, devices connected when the TV is already on are not displayed in the device list. In this case, select the Searching Connections menu to search devices.

➢If you have selected an external device by pressing the SOURCE button, you cannot use the Anynet+ function. Make sure to switch to an external Anynet+ device by using the TOOLS button.

Continued...

English - 68