Samsung series 510 user manual Changing Channels

If you want to reset this feature...

1	Press the MENU button to display the menu.
	Press the ▲ or ▼ button to select Setup, then press the ENTER button.
	Setup
2	Press the ENTER button to select Plug & Play. For further details on setting
	up options, refer to the pages 17~18.
	➢ The Plug & Play feature is only available in the TV .

Plug & Play	►
Language	: English
Time
V-Chip
Caption
Melody	: Medium
Entertainment	: Off
SW Upgrade

Plug & Play

Menu Language, Store Demo, Channels and Time will be set.

OK

Enter Return

Changing Channels

Using the Channel Buttons

1Press the CH or CH button to change channels.

➢ When you press the CH or CH button, the TV changes channels in sequence. You will see all the channels that the TV has memorized. (The TV must have memorized at least three channels). You will not see channels that were either erased or not memorized. See page 21 to memorize channels.

Using the Number Buttons

1Press the number buttons to go directly to a channel. For example, to select

channel 27, press 2, then 7.

The TV will change channels when you press the second number.

➢ Forbutton.quick channel change, press the number buttons, then press the ENTER

➢ You can press number buttons on Remote control for direct channel access, press the same Number button again to switch between digital and analog TV channels broadcast by the same station.

Using the “-” Button

The “ ” button is used to select stations that broadcast a digital signal. 1 For example, for Channel 7-1, press 7, then , then 1.

➢ HD indicates the TV is receiving a Digital High Definition signal. SD indicates the TV is receiving a Standard Definition signal.

➢Forbutton.quick channel change, press the number buttons, then press the ENTER

Using the PRE-CH Button to select the Previous Channel

Use the number buttons to quickly tune to any channel.

1 Press the PRE-CHbutton. The TV will switch to the last channel viewed.

➢To quickly switch between two channels that are far apart, tune to one channel, then use the number button to select the second channel.

Then use the PRE-CHbutton to quickly alternate between them.

English - 19