Lucent Technologies 555-670-116 Technical Addendum, Maintenance Error Codes-Continued, Issue

MERLIN LEGEND Communications System Release 7.0			Issue 1
Pocket Reference 555-670-116			April 1999
Reference Documents			118
	Technical Addendum
	Maintenance Error Codes—Continued
	Error
	Code Description	Action

6C10 BRI NET INV 2B+D LB ACT:

Service on link has been lost.

Usually none; link should return to normal once test is completed. If problem persists, contact NSAC Tier III.

6C11 BRI NET INV B1 LB ACT:

Service on link has been lost.

Usually none; link should return to normal once test is completed. If problem persists, contact NSAC Tier III.

6C12 BRI NET INV B2 LB ACT:

Service on link has been lost.

Usually none; link should return to normal once test is completed. If problem persists, contact NSAC Tier III.

6C13 BRI NET INV IL LB ACT:

Service on link has been lost.

Usually none; link should return to normal once test is completed. If problem persists, contact NSAC Tier III.

6C14 BRI NET INV QM LB ACT:

Service on link has been lost.

Usually none; link should return to normal once test is completed. If problem persists, contact NSAC Tier III.

7001 PRI SVC AUDIT TIMEOUT: Check PRI facility and report to service provider; otherwise, no

action is needed. If problem persists, contact NSAC Tier III.

7002 PRI SVC STATE INCONSIST:

Check PRI facility and report to service provider; otherwise, no action is needed. If problem persists, contact NSAC Tier III.

7003 PRI D-CHNL INOPERATIVE: Check PRI facility and report to service provider; otherwise, no

action is needed. If problem persists, contact NSAC Tier III.

7004 PRI B-CHNL NOT

RELEASED:

Check PRI facility and report to service provider; otherwise, no action is needed. If problem persists, contact NSAC Tier III.

7005 PRI B-CH GROUP INCONSIST:

Check PRI facility and report to service provider; otherwise, no action is needed. If problem persists, contact NSAC Tier III.

7006 PRI PROTOCOL MISMATCH:

A mismatch in the protocol being supplied versus the protocol expected by MERLIN LEGEND.

Inform the service provider to change the administration for this circuit. After the service provider restarts the circuit, verify that all alarms for this slot are cleared.