Pioneer S-DV131 Tuner, Error Messages, 08Additional information, Rec Mode, Snd. Demo, Cannot

08Additional information

Problem	Remedy
Files don’t show up in	• The files on the disc must be named with the correct file extension: .mp3
the Disc Navigator/	for MP3 files; .wma for WMA files; .jpg for JPEG files (upper or lower-case is
Photo Browser.	OK). See Disc compatibility table on page 31 for more on this.
Can’t play WMA files.	• The files were recorded using DRM (digital rights management). This is not
	a malfunction.

Tuner

Problem	Remedy
Considerable noise in	• Connect the AM antenna (refer to the Setup Guide) and adjust the direction
radio broadcasts.	and position for best reception. You may also connect an additional internal
	or external AM antenna (refer to Connecting external antennas on page 26).
	• Fully extend the FM wire antenna, position for best reception, and secure to
	a wall. You may also connect an outdoor FM antenna (see Connecting external
	antennas on page 26).
	• Turn off other equipment that may be causing the noise or move it further
	away.
	• The tuning interval is incorrect for your country or region. Try switching the
	tuning interval (frequency step) (see Frequency step setting on page 35).
Auto tuning does not	• The radio signal is weak. Auto tuning will only detect radio stations with a
pick up some stations.	good signal. For more sensitive tuning, connect an outdoor antenna.

Error Messages

Message	Description
REC MODE	• An operation is prohibited because the Recording Mode is on (page 25).
SND. DEMO	• The sound demo is on. See General in Troubleshooting on page 36.
CANNOT	• An operation is prohibited because headphones are connected, or TEST
	TONE is pressed during disc playback.
STEREO	• An operation is prohibited because the DVD/CD function isn’t selected.
TRAYLOCK	• The tray lock is on. See General in Troubleshooting on page 36.
MUTING	• An operation is prohibited because the sound is muted (press MUTE).
EEP ERR	• Contact your Pioneer authorized service center or your dealer for servicing.
EXIT	• Appears when a menu is automatically exited after a set period of inactivity.

38

En