![01Getting started](/images/new-backgrounds/30047/3004719x1.webp)
01Getting started
Setting the sleep timer
The sleep timer switches off the system after a specified time so you can fall asleep without
worrying about it.1
•Press SLEEP repeatedly to select an option then press ENTER.
Choose between the following options:2
•SLP AUTO – Switches off automatically after the currently playing CD, Video CD or DivX disc has finished.
•SLP ON – Switches off after about an hour
•SLP OFF – Cancels the sleep timer
After selecting SLP ON , you can press SLEEP again to check how much time is left. Each line indicates approximately 12 minutes (remaining):
S L P - - - - -
Dimming the display
You can choose to dim the display if you find it too bright.
1 | Press SHIFT+SYSTEM SETUP . | |
2 | Use | (cursor left/right) then ENTER |
to choose the dimmer setting.
This is shown in the front panel display.
3 Use (cursor up/down) to select LIGHT or DARK then press ENTER.
Note
1The display dims when the sleep timer is set.
2Sleep Auto will not work with WMA/MP3 discs, Video CD/Super VCDs during PBC playback, or CDs in repeat play.
10
En