Pioneer S-DV232T, S-DV131 manual DVD/CD/Video CD player, Additional information

Additional information 08

Problem	Remedy
TRAYLOCK shows in	• Press and hold (eject) on the front panel for about eight seconds. Then
the display and the tray	the tray can be opened/closed using (eject).
can’t be ejected.

DVD/CD/Video CD player

Problem	Remedy
The disc is ejected	• Clean the disc and align the disc properly in the disc guide.
automatically after	• If the region number on a DVD-video disc does not match the number on
loading.	the player, the disc cannot be used (see DVD Video regions on page 33).
	• Allow time for any condensation inside the player to evaporate. Avoid using
	the player near an air-conditioning unit.

Playback not possible. • If the disc is loaded upside down, reload the disc with label side face up.

Picture playback stops	• Press (stop), then (play) to start playback again.
and buttons cannot be	• Switch the power off once, then on again using the front panel
used.	STANDBY/ON button.
Settings are canceled.	• When the power is cut, settings will be canceled.
No picture/No color.	• Check that connections are correct and that plugs are inserted fully.
	• Check the manual of the TV/monitor to make sure the settings are correct.
Screen is stretched or	• The TV Screen setting is incorrect. Set the TV Screen option to match the
aspect doesn’t change.	TV/monitor you're using (see Video Output settings on page 20).
When recorded on a	• This system uses copy-protection technology which may prevent recording
VCR or passed through	or cause picture problems when connected through a VCR or AV selector.
an AV selector, there is	This is not a malfunction.
disturbance in the
playback picture.
Picture disturbance	• This player is compatible with Macro-Vision System copy guard. Some
during playback or	discs include a copy prevention signal, and when this type of disc is played
dark.	back, stripes etc., may appear on some sections of the picture depending on
	the TV. This is not a malfunction.
	• Discs respond differently to particular player functions. This may result in
	the screen becoming black for a brief instant or shaking slightly when the
	function is executed. These problems are largely due to differences between
	discs and disc content and are not malfunctions of this player.
Noticeable difference	• DVDs and CDs use different recording methods. This is not a malfunction.
in DVD and CD
volume.
CD-ROM disc is not	• Make sure that the CD-ROM was recorded using the ISO 9660 disc format.
recognized by the	See on page 31 for other disc compatibility information.
system.

English Deutsch Français Italiano Nederlands Español

37

En