Nikon COOLPIXS9300SIL, S9200, COOLPIXS9300BLK manual Error Messages, E92, Display Cause/Solution

Error Messages

The following table lists the error messages and other warnings displayed on the monitor, as well as the solutions for dealing with them.

	Display		Cause/Solution	A
	O	Clock not set.		E67
	(flashes)	Set date and time.
	Battery exhausted.	Battery exhausted.		14, 16
		Charge or replace the battery.
		Battery temperature is high.
		Turn off camera, and allow battery to cool down before
	Battery temperature	resuming use. Five seconds after this message appears, the
		monitor is turned off, and the power-on lamp and the flash		21
	high
		lamp flash quickly. After the lamps flash for three minutes, the
		camera turns off automatically, but you can also press the
		power switch to turn it off manually.
	The camera will turn	Inside of the camera has become hot. The camera turns off
		automatically.
	off to prevent			–
		Leave the camera off until the inside of the camera has cooled
	overheating.
		and then turn it on again.
	Q	Camera cannot focus.
		•	Refocus.	28
	(flashes red)
		•	Use focus lock.	76
	Please wait for the	Camera cannot perform other operations until recording is
		complete.
	camera to finish			–
		Wait until message clears from display automatically when
	recording.
Reference		recording is complete.
	Memory card is write	Write-protect switch of the memory card is in “lock” position.		–
	protected.	Slide the write-protect switch to “write” position.
Section	Not available if Eye-Fi	Write-protect switch of Eye-Fi card is in “lock” position.		–
		Error accessing Eye-Fi card.
		Slide the write-protect switch to “write” position.
	card is locked.	• Use an approved card.		19
		• Check that the terminal is clean.		18
		• Confirm that memory card is correctly inserted.		18
	This card cannot be	Error accessing memory card.
	used.	• Use an approved card.		19
	This card cannot be	• Check that the terminal is clean.		18
	read.	• Confirm that memory card is correctly inserted.		18

E92