Nikon S9200 Using Preset Manual, BPreset manual, then press the k button, Choose Measure, E34

The Shooting Menu (for A (Auto) Mode, Continuous Shooting Mode)

Using Preset Manual

Use when you want to make pictures taken under unusual lighting conditions (e.g., lamps with reddish-light) look as though they were shot in normal light.

Use the procedure below to measure the white balance value under the lighting used during shooting.

1Place a white or gray reference object under the lighting that will be used during shooting.

2Display the shooting menu (A36), use the multi selector to set White balance to

bPreset manual, then press the k button.

•The lens extends to the zoom position for measurement.

White balance

Auto

Preset manual

Daylight

Incandescent

Fluorescent

Cloudy

Flash

Reference Section

3 Choose Measure.

Preset manual

•To apply the most recently measured white balance value, select Cancel and press the kbutton. The most recently measured white balance value will be set without measuring the white balance value again.

	Cancel
	Measure
4 Frame a white or gray reference object in the
	Preset manual
reference object frame.
	Cancel
	Measure

Reference object frame

5Press the k button to measure the white balance value.

•The shutter is released and the new white balance preset value is set (no picture is recorded).

BNote on Preset Manual

The camera cannot measure a white balance value for when the flash fires. When shooting with the

flash, set White balance to Auto or Flash.

E34