Nikon COOLPIXS9300SIL, S9200, COOLPIXS9300BLK manual F16

Troubleshooting

	Problem		Cause/Solution	A
		• Video mode or HDMI is not correctly set in the TV settings		102,
			setup menu.	E79
	Pictures not	• Cables are connected to both the HDMI mini connector and		82
	displayed on		USB/audio video connector.
	television.	• Memory card contains no pictures. Replace memory card.		18
			Remove memory card to play back pictures from internal
			memory.
	Album icons are
	reset to their
	default icons, or	Data saved in the internal memory or on the memory card may
	images added to			–
	albums cannot be	not be played back if overwritten by a computer.
	displayed in
	favorite pictures
	mode.
		• The desired image was sorted to a category other than the
			category currently displayed.
		• Images saved by cameras other than COOLPIX S9300/S9200
	The saved images		and images copied using the Copy option cannot be
			displayed in auto sort mode.
	are not displayed			–
		• Images saved in the internal memory or on the memory card
	in auto sort mode.
			may not be played back correctly if overwritten by a computer.
		• Up to 999 images and movies in total can be added to each
			category. If the desired category already contains 999 images
			or movies in total, new images or movies cannot be added.
		•	Camera is off.	21
		•	Battery is exhausted.	20
	Nikon Transfer 2	• USB cable is not correctly connected.		82
Technical	does not start	• Camera is not recognized by the computer.		–
	computer.	•	Computer is not set to launch Nikon Transfer 2 automatically.	–
	when camera is	• Confirm that the operating system used is compatible with		83
	connected to a		the camera.
Notes			For more information on Nikon Transfer 2, refer to help
			information contained in ViewNX 2.
and
	The PictBridge	With some PictBridge-compatible printers, the PictBridge startup
Index	startup screen is
		images when Auto is selected for the Charge by computer		102,
	not displayed
		screen may not be displayed and it may be impossible to print
	when the camera	option in the setup menu. Set the Charge by computer option		E80
	is connected to a	to Off and reconnect the camera to the printer.
	printer.
	Pictures to be	• Memory card contains no pictures. Replace memory card.		18
	printed are not	• Remove memory card to print pictures from internal memory.		19
	displayed.	• Pictures taken by 3D photography cannot be printed.		E5

F16