Nikon COOLPIXS9300SIL, S9200, COOLPIXS9300BLK manual F13, Shooting Issues

		Troubleshooting
Shooting Issues
Problem		Cause/Solution	A
Cannot set to	Disconnect the HDMI cable or USB cable.		82, 85,
			E23,
shooting mode.
			E26
	• When camera is in playback mode, press the cbutton,		30
No picture can be		shutter-release button or b(emovie-record) button.
	• When menus are displayed, press the dbutton.		11
taken.
	•	Battery is exhausted.	20
	• When flash lamp flashes slowly, flash is charging.		60
Cannot take 3D	In some shooting conditions, such as when the subject moves or
	the subject is dark or low in contrast, the second shot may not be		–
pictures
	taken or the 3D picture may not be saved.
	• Subject is too close to the camera. Try shooting with Macro		39, 45
		mode, x (Scene auto selector) or Close-upscene mode.
Camera cannot	• The intended subject is one with which autofocus does not		29
		perform well.
focus.	•	Set AF assist in the setup menu to Auto.	101, E75
	• Subject not in focus area when shutter-release button is		28, 37
		pressed halfway.
	• Turn camera off and then on again.		21
	Colored stripes may appear when shooting subjects with
Colored stripes	repeating patterns (such as window blinds); this is not a
	malfunction.
appear on the
	The colored stripes will not appear in captured images or		–
monitor when
	recorded movies. However, when using Continuous H: 120 fps
shooting.
	or HS 120 fps (640×480), the colored stripes may be seen in
	the captured images and recorded movies.
				Technical
	•	Use flash.	60
	• Use vibration reduction or motion detection.		101,
			E73,
Pictures are	•		E74	Notes
blurred.		Use D(Best Shot Selector).	56
	• Use a tripod to stabilize the camera (use with the self-timer for		63	and
		better results).
	• Specify a higher ISO sensitivity setting and resume shooting.		37, E36	Index
Bright specks	Flash is reflecting off particles in air. Set the flash to W (off ).		61
appear in pictures
shot using flash.

F13