Nikon S9200, COOLPIXS9300SIL manual Select Save log, and press the kbutton, E62, To Erase Log Data

Reference Section

GPS Options (COOLPIX S9300 only)

4 Select Save log, and press the kbutton.
	End log
• The log data is saved to a memory card.		Save log
		Erase log

BNotes on Log Recording

•If the date and time are not set, the log cannot be recorded.

•Use a fully charged battery to prevent the camera from turning off unexpectedly during log recording. When the battery power becomes exhausted, log recording ends.

•Log recording ends due to the operation below, even when there is time remaining for log recording.

-The USB cable is connected.

-The battery is removed.

-Record GPS data in GPS options is set to Off (same as when Reset all is performed).

-The setting of the internal clock (time zone or date and time) is changed.

•Log recording is paused during the operations below.

-During continuous shooting

-During movie recording

•If time for log recording still remains even when the camera is turned off, log recording is continuously performed until the preset time has elapsed.

•The log data is temporarily stored in the camera. New logs cannot be recorded if the log data remains in the camera. After recording log data, save it to a memory card.

•A maximum of 36 log data events can be recorded in one day.

•A maximum of 100 log data events can be saved to a single memory card.

CTo Erase Log Data

•To erase the log data that is temporarily stored in the camera, select Erase log in step 4.

•To erase the log data that is stored in the memory card, press the lbutton in View log (E63).

CLog Data

Log data is NMEA format-compliant. However, display in all NMEA format-compliant software or on all NMEA format-compliant cameras is not guaranteed.

E62