Nikon S9200, S9300 manual Using the Flash Flash Modes, Press H m flash mode on the multi selector

Features That Can Be Set Using the Multi Selector

Using the Flash (Flash Modes)

You can set a flash mode that suits the shooting conditions.

1Press H (m flash mode) on the multi selector.

Shooting Features

2Use the multi selector to select the desired

mode and press the k button.

• See “Available Flash Modes” (A61) for more information.

•If the kbutton is not pressed within a few seconds,

the selection will be canceled.
	Auto

•When U (auto) is applied, Dis only displayed for

a few seconds, regardless of Photo info settings (A100).

3Frame the subject and take a picture.

•The flash lamp indicates the status of the flash when

the shutter-release button is pressed halfway.

- On:	The flash will fire when you press the
	shutter-release button all the way.

- Flashing:The flash is charging. The camera cannot take pictures.

- Off:	The flash will not fire when a picture is
	taken.

•If the battery is low, the monitor will be turned off while the flash is charging.

C Effective Range of the Flash

The flash has a range of about 0.5 to 5.1 m (1 ft 8 in. to 16 ft) for wide-angle position, and about 1.5 to

603.0 m (5 ft to 9 ft 10 in.) for telephoto zoom position (when ISO sensitivity is set to Auto).