E26
Connecting the Camera to a Printer (Direct Print)
Reference Section

Connecting the Camera to a Printer

1Turn off the camera.
2Turn on the printer.
Check the printer settings.
3Connect the camera to the printer using the included USB cable.
Be sure that the plug is oriented correctly. When disconnecting the cable, do not pull
the plug at an angle.
4The camera is automatically turned on.
When connected correctly, the PictBridge startup screen (1) is displayed on the
camera monitor. Then the Print selection screen (2) is displayed.
BIf the PictBridge Startup Screen Is Not Displayed
Turn the camera off and disconnect the USB cable. Set the Charge by computer option (E80) in
the camera’s setup menu to Off and reconnect the cable.
12
32
32
NO.
Print selection
15/05
2012