Diagnostic Software, Trouble Shooting and Test Instructions | DVD963SA |
| 5. |
| EN 29 |
Error |
|
|
Code | Error name | Explanation |
|
|
|
0008 | SP_CONTINU | Sequence of sectors coming |
| ITYERROR | from disc is incorrect. Reason: |
|
| see SP_SYNCERROR |
|
|
|
0009 | DMX_CONTI | Sequence of sectors is incorrect. |
| NUITYERRO | Reason: problem with buffer |
| R | RAM |
|
|
|
000A | LLD_ERROR | An illegal audio format was |
|
| offered to the decoder. Reason: |
|
| unknown audio type on disc or |
|
| problem with buffer RAM |
|
|
|
000B | BCU_ERROR | Internal problem in Furore chip |
|
|
|
SMA Error Codes
Error |
|
|
Number | Error name | Explanation |
|
|
|
0000 | SMA_TIMEO | Data coming from disc not in |
| UTERROR | time. Reason: damaged disc or |
|
| engine problem. |
|
|
|
5.6.2Reprogramming of New Mono Boards.
Caution
This information is confidential and may not be distributed. Only a qualified service person should reprogram the mono board.
After reset of
Reprogramming of the mono board will put the player back in the state in which it has left the factory, i.e. with the default settings and the allowed region code.
Reprogramming is limited to 25 times
When the counter reaches 25, reprogramming is not possible anymore Reprogramming will be done by way of the remote control.
Put the player in stop mode, no disc loaded. Press the following keys on the remote control: <PLAY> followed by numerical keys <1> <5> <9> The display shows: “- - - - - - - - - -
Press now successively the following keys :
for DVD963SA /001 : <2><2><2> <0><1><2><0><0>
for DVD963SA 171 : <1><1><1> <0><1><0><0><0>
for DVD963SA 691 : <3><2><3> <0><1><0><0><0>
Press <PLAY> again.
The TV screen will become BLUE during a short time to confirm that the mono board has been reprogrammed.
CL 26532105_053.eps 280802
