Diagnostic Software, Trouble Shooting and Test Instructions | DVD963SA |
| 5. |
| EN 21 |
5. Diagnostic Software, Trouble Shooting and Test Instructions
5.1Dealerscript
5.1.1Purpose of Dealer Script
The dealer script can give a diagnosis on a standalone DVD player, no other equipment is needed to perform a number of hardware tests to check if the DVD player is faulty. The diagnosis is simply a "error" or "pass" message. No indication is given of faulty hardware modules. Only tests within the scope of the diagnostic software will be executed hence only faults within this scope can be detected.
Nucleus
5.1.2Contents of Dealer Script
The dealer script executes all diagnostic nuclei that do not need any user interaction and are meaningful on a standalone DVD player.
The nuclei called in the dealer script are the following (the number after each nucleus name corresponds with the number being on the local display when the nucleus is executed during the dealer script):
| Display |
| Nucleus |
| Nucleus |
| Description |
|
|
|
| ||||
| Countdown |
| Number |
| Name |
|
|
|
|
|
|
|
|
|
|
| 7 |
| 6 |
| PapChksFl |
| Calculate and verify checksum of FLASH memory |
|
|
|
|
|
|
| Checks the I2C interface with the slave processor on |
| 6 |
| 12 |
| PapI2cDisp |
| the display board |
| 5 |
| 13 |
| PapS2bEcho |
| Checks the I2C interface to the basic engine |
| 4 |
| 11 |
| PapI2cNvram |
| Checks the I2C interface with the NVRAM |
| 3 |
| 15 |
| PapNvramWrR |
| Pattern test of all locations in the NVRAM |
| 2 |
| 16 |
| CompSdramWrR |
| Pattern test of all locations in the SDRAM(s) |
| 1 |
| 63 |
| FURORERSdramWrRLow |
| Pattern test of all locations in the SDRAM(s)CL26532053_052150502.eps |
Figure 5-1 Dealer script nuclei
Press 2 keys simultaneously <OPEN/CLOSE> + <PLAY> Connect to mains.
During the test, the following display is shown: the counter counts down from the number of nuclei to be run before the test finishes. Example:
NO
SET O.K.?
YES
To exit DEALER SCRIPT, disconnect from mains 
CL 26532053_053.eps 150502
