Lucent Technologies 555-670-116 Technical Addendum, Maintenance Error Codes-Continued, Issue

MERLIN LEGEND Communications System Release 7.0			Issue 1
Pocket Reference 555-670-116			April 1999
Reference Documents			112
	Technical Addendum
	Maintenance Error Codes—Continued
	Error
	Code Description	Action

0010 INVALID SLOT INTERRUPT:

Cannot determine module responsible for interrupt.

Check modules and replace if necessary; if problem persists, check processor.

0011	STACK OVERFLOW:	Check processor.
	Processor problem.
0012	INVALID RESET FLAG:	Check processor.
	Processor problem.
0013	DUART STREAMING INT:	Check processor.
	Processor problem.
0014	PROCESSOR ERR	Check processor.
	INTERRUPT:
	Processor problem.
0015	MODULE MISMATCH:	Change system
	Module inserted into wrong slot.	programming for proper module
		or install proper module.
0016	POWER UP COLD START:	If problem persists, check
	Module dual port ram failure;	module for slot indicated.
	system programming OK.
0017	REAL TIME CLOCK FAULT: If problem persists, replace
	Date and/or time incorrect or	processor module.
	unreadable.
0018	RTC COLD START:
	This error is not displayed.

0019 RESET TIME & DATE:

System cold-starts because real- time clock chip is not working correctly.

If problem persists, replace processor module.

0401 ABK CARD NOT INSERTED: Insert a translation card or an

PCMCIA memory card for	unformatted card.
translation is not inserted.

0402 ABK INCORRECT CARD TYPE:

PCMCIA memory card for non- translation is inserted.

Remove current card and insert a translation card or an unformatted card.

0403	ABK CARD WRITE-	Turn write-protection switch to
	PROTECTED:	off. If problem persists, try
		another card. If still not working,
	Translation card has write-
		replace processor module.
	protected switch on.
0404	ABK EXTENSION BUSY:	Wait until station changes
	A station is in program,	mode.

administration, or maintenance mode.