Perle Systems 5500152-23 SCO OpenServer 5 error messages, Error message, Reason, Action required

SCO OpenServer 5 error messages

Error message	Reason	Action required
ERROR: unit @0xnnnnnnnn has	Incorrectly installed or faulty	1.	Ensure that you have followed the
bad resource(s)	card.		installation procedure correctly.
	Incorrect BIOS settings.		See page 45.
		2.	Check BIOS settings.
		3.	If the problem persists try another card.
			See page 45 and page 94.
ERROR: unit @0xnnnnnnnn not	Insufficient memory available	Reconfigure system/kernel memory
mapped	to kernel.	parameters.
ERROR: unit @0xnnnnnnnn not	Incorrectly installed or faulty	1.	Ensure that you have followed the
initialised	card.		installation procedure correctly.
			See page 45.
		2.	If the problem persists try another card.
			See page 45 and page 94.
WARNING: unit @0xnnnnnnnn not	System error.	1.	Uninstall the driver and remove all
configured			Speed cards from the system.
			See page 60
		2.	Re-install the driver and cards taking
			care to follow the correct procedure.
			See page 45 and page 94.
WARNING: No Speed ports	No cards installed.	1.	Install cards. See page 94.
configured	Installed cards suffer from	2.	Resolve any above listed faults.
	one or more of above
	symptoms.

UltraPort Serial Adaptors User Guide

SCO OpenServer 5

Page 142