Removing host cards
To remove an UltraPort card from your system, proceed as follows:
Note
The exact location of host card slots varies for different systems, for exact mechanical details of your system, refer to your system documentation.
Warning
Dangerous voltages exist inside computer systems. Before removing host cards from your system, turn off the power supply and unplug the power cord.
1.Turn off the power to your system and unplug the power cord.
2.Remove the system cover to expose the inside of the connector panel for host cards.
3.Disconnect any cables or connector boxes connected to the card you want to remove.
4.Undo the securing screw for the host card you want to remove then lift the card out of its slot as shown in the next picture.
Caution
Full
5.Repeat from step 3. until you have removed all the host cards you want.
6.Replace and secure the system cover.
7.Plug in the mains lead and turn on the power.
Removal of UltraPort card is now complete.
UltraPort Serial Adaptors User Guide | Chapter 2 Installing drivers and host cards |
Removing host cards | Page 100 |
|
